TC Electronic Ditto X4 Looper PedalProduct #35855 | SKU 960805001
- Dual Loop Pedal with Effects
- Works with Guitar and Other Instruments
- Seven Built-In Loop-Centric Effects
- Stereo In and Out
- Interface with MIDI Clocks and Controls
TC Electronic's Ditto X4 Looper Pedal can run two loops simultaneously for some intricate arrangements and composition possibilities. The front panel contains the main looping controls. Each loop can hold up to 5 minutes of music and has its own level control and footswitch for operation. Both loops can be on simultaneously or switched between for a "verse-chorus" arrangement. A global Stop footswitch stops both loops. Adding a little more spice to your loops is as simple as stepping on the FX footswitch, engaging one of seven loop-friendly effects ranging from simple fades to all out Reverse.
Choose from seven effects to enhance your loops in real time.
Loop decay determines how fast old layers fade away, so you can keep you composition evolving at your own pace. If you don't want your loops to fade, simply set it fully clockwise.
If you save a loop to the Ditto X4's onboard storage, you can export it to your DAW over USB to create compositions and song arrangements. It also works in the other direction, so you can take audio from your computer and store it inside the pedal for looping later.
Using the MIDI in/through jacks, you can easily sync your loops with an external MIDI clock or controller.
Operate your loops in stereo or plug in multiple instruments to double your creative options.
DIP Switch Customisation
Using the DIP switches on the rear of the pedal, you can customise the functionality of the footswitches and engage/disengage the internal I/O buffer so you can customise the Ditto X4 to your liking.
|Inputs||2 x 1/4" instrument TS
1 x MIDI
|Outputs||2 x 1/4" instrument TS
1 x MIDI (through)
|USB Port||1 x micro-USB (import/export loops)|
|Power Requirements||9 VDC, 300 mA|