| Computer System Requirements |
Minimum computer-system requirements for UC Surface:
Mac
Mac OS X 10.8 64-bit or later
Intel Core 2 Duo processor (Intel Core i3 or faster recommended)
4 GB RAM (8 GB or more recommended)
Windows
Windows 7 x64/x86 SP1, Windows 8 x64/x86
Intel Core 2 Duo processor (Intel Core i3 or faster recommended)
4 GB RAM (8 GB or more recommended)
Mac and Windows Systems
Wired or wireless network connection
Internet connection
For Capture and Studio One:
FireWire S800 (IEEE 1394b) port
Internal or external 7200 RPM storage drive highly recommended
Monitor with 1280x800 resolution
|
| Mic Preamps |
Input Type: XLR Female, balanced, locking
Frequency Response to Direct Output (at unity gain): 20 - 40 kHz, ±0.5 dBu
Frequency Response to Main Output (at unity gain): 20 - 20 kHz, ±0.5 dBu
Input Impedance: 1 kΩ
THD to Main Output (1 kHz at unity gain): 0.005%, +4 dBu, 20 - 20 kHz, unity gain, unweighted
S/N Ratio to Main Output (Ref = +4 dB, 20 kHz BW, unity gain, A-weighted): 94 dB
Common Mode Rejection Ratio (1 kHz at unity gain): 65 dB
Gain Control Range (±1 dB): 0 dB to +65 dB
Maximum Input Level (unity gain): +12 dBu
Phantom Power (±2 VDC): 48 VDC, switchable per channel
|
| Stereo Tape Inputs/Type |
Type: RCA Female, unbalanced (stereo pair)
Maximum Input Level: +12 dBu |
| Main Outputs |
Type: XLR Male, balanced
Rated Output Level: +24 dBu
Output Impedance: 100Ω
|
| Mix Outputs |
Type: XLR Male, balanced
Rated Output Level: +24 dBu
Output Impedance: 100Ω |
| Headphone Output |
Type: 1/4” TRS Female, active stereo
Maximum Output: 120 mW/ch. @ 60Ω load
Frequency Response: 20 Hz – 20 kHz (± 0.5 dB)
THD+N: 0.01%, 1 kHz, max gain, 20 Hz BW, unweighted
S/N Ratio: 96 dB, 1 kHz, max gain, 20 Hz BW, unweighted |
| Crosstalk |
Input to Output: -90 dB (Ref = +4 dBu 20 - 20 kHz, unweighted)
Adjacent Channels: -87 dB (Ref = +4 dBu 20 - 20 kHz, unweighted) |
| Noise Gate / Expander |
Threshold Range: -84 dB to 0 dB
Attack Time: 0.02 s to 500 ms / 0.5 ms
Release Time: 0.05 to 2 s
Expander Attenuation Range: 2:1 (fixed)
Noise Gate Attenuation Range: -84 to 0 dB
Key Filter: 2nd-order, resonant bypass; Q=0.7
Key Listen: Off, 40 Hz to 16 kHz |
| Compressor |
Threshold Range: -56 to 0 dB
Ratio: 1:1 to 14:1
Attack Time: 0.2 to 150 ms
Release Time: 40 to 1,000 ms
Auto Attack and Release: Attack = 10 ms, Release = 150 ms
Curve Types: hard and soft knee |
| Limiter |
Threshold: -56 to 0 dB / -28 dBFS
Ratio: ∞:1
Attack: 20 ms
Hold: 10 ms
Release: 20 ms |
| Parametric Equaliser |
Type: 2nd-order shelving filter
Low (Lowpass or Bandpass): 36 to 465 Hz, ±15 dB
Low Mid (Bandpass): 90 Hz to 1.2 kHz, ±15 dB
High Mid (Bandpass): 380 Hz to 5 kHz, ±15 dB
High (Highpass or Bandpass): 1.4 kHz to 18 kHz, ±15 dB
Q (sweepable for each band): 0.1 to 4 / Low Q= 0.55, Hi Q=2.0 |
| Graphic AEQ |
31-Band 1/3-Octave Controls: centre frequencies (Hz) - 20, 25, 32, 40, 50, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1k, 1.3k, 1.6k, 2k, 2.5k, 3.2k, 4k, 5k, 6.4k, 8k, 10k, 13k, 16k, 20k
Each band has a constant Q
Gain/Attenuation: ±15 dB |
| Digital Audio |
ADC Dynamic Range: 118 dB (A-weighted, 48 kHz)
DAC Dynamic Range: 118 dB (A-weighted, 48 kHz)
FireWire: S800, 800 Mb/s
S/PDIF Output: RCA Female
Internal Processing: 32-bit, floating point
Sampling Rate: 44.1, 48, 88.2, 96 kHz
A/D/A Bit Depth: 24
Reference Level for 0 dBFS: +18 dBu |
| Clock |
Type: JetPLL
Jitter: <20 ps RMS (20 Hz - 20 kHz)
Jitter Attenuation: >60 dB (1 ns in, 1 ps out) |
| Power and Thermal |
Connector: IEC
Input-Voltage Range: 90 to 240 VAC
Power Requirements (continuous): 200W
Recommended Ambient Operating Temperature: 32˚ to 104˚F (0˚ to 40˚C) |
| Dimensions |
13.34 x 48.26 x 26.67 cm |
| Weight |
8.62 kg |
