Studio Monitors

• For EON710, EON712, and EON715 Speakers

• Ideal for rental and event organisers
• Extremely robust steel construction
• Double-braced legs

• Compact, Bookshelf Design
• Great for Accurate Sound in Small Places
• Stereo Bluetooth 5.0 Streaming
• 5.25" Woven Composite Woofer
• 1" Silk-Dome Tweeter
• Low- and High-Frequency Adjustment

• 8" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 105 dB SPL
• EBM Waveguide for a Wide Sweet Spot
• Control Level, HPF, MF Trim, and HF Trim
• Acoustic Space Filter

• 5.25"(13.3 cm) Woofer
• 0.75"(1.9 cm) Dome Tweeter
• 35 W/Channel Amplifier
• XLR, 1/4", and RCA Inputs
• Stereo Headphone Jack

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• Reinforced steel telescoping pole
• Holds up to 68kg
• Twist lock and secure locking pin
• Compatible with 35mm pole cups
• 760-1160mm height adjustment

• 180-Watt Bridge-Mode Amplifier
• Long-Throw 10" Woofer
• Advanced Waveguide
• XLR and RCA Input Connectors
• Low-Pass Filter for Crossover Alignment

• Compatible with the Q150 Bookshelf Speakers

• Solid and durable stand construction
• Strong and stable tripods
• Interchangeable colour rings

• Analogue Stereo Volume Control
• Fits Any Active Speaker Setup
• Minimum of Clutter and Wires
• High-Precision Level Control
• No Power Required

• 3-D Imaging Waveguide
• Dual-Layer Voice Coil
• Low Noise Port Tube

• Universal stand for studio near-field monitors and wide range of loudspeakers
• Perfect for recording studios and listening environments
• Large 23 cm x 23 cm metal platform with soft rubberised padding reduces vibration
• Precise height adjustment in 5 steps from 30 cm up to 51 cm of elevation
• Heavy-duty steel construction for maximum weight capacity of 8.17 kg
• Floor base length of 24 cm per side

• 1/4" screw mounting for use with LSX.
• Aluminium construction for rigidity and stability.
• 10° upwards tilt.

• Loaded with the same transparent audio circuitry as Drawmer's high-end offerings
• Streamlined design is tailor-made for smaller project studios
• Accommodates two sets of studio monitors and a subwoofer
• Built-in headphone amplifier with dedicated level control
• 3 inputs including 2 TRS jacks and a 1/8" auxiliary jack

Anodized Aluminum Construction, Integrated Cable Management, 34" High, For the Sonos One, PLAY:1, or PLAY:3, Horizontal/Vertical Placement of PLAY:3

Supports Most Speakers up to 10 lb, 1/4"-20 Threaded Mounting to Speakers, Up to 27° of Tilt Adjustment, Up to 180° of Swivel Adjustment

• 3 x Sources and 2 x Monitor Pairs
• Classic Big Knob Volume Control
• Independent Trim on All Sources
• Mono, Mute, and Dim Functions
• 2x2 USB Recording Interface

• 50Hz – 20kHz Frequency Response
• 0° Phase Response
• 75W + 25W Class-D Amplifiers
• 5” Composite Fiberglass Woofer
• 1” ferrofluid cooled Soft Dome tweeter
• RCF Precision Waveguide

• 1/4" screw mounting for use with LSX.
• Aluminium construction for rigidity and stability.
• 40° downward tilt.
• 90° sideways speaker positioning in both directions.
• Integrated cable management system.

• 64-Watt reference-class studio monitors
• Advanced Waveguide technology
• Ultra-high resolution 1" silk dome tweeters
• Long-throw 4.5" woofers
• Two stereo analog inputs
• Low and high frequency controls

• Sold as a pair.
• Aluminium floor stands
• For T Series speakers
• Selecta-mount™ system

• 8" Woofer (80W)
• 1" Soft-Dome Tweeter (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 64W reference-class studio monitors
• Advanced Waveguide technology
• Ultra-high resolution 1" silk dome tweeters
• Long-throw 3.5" woofers
• Two stereo analog inputs
• Low and high frequency controls

• Ideal for rental and event organisers
• Solid and durable construction
• Automatic LockPin®-technology
• Ergonomic handling
• Compact transportation

• Comfortable height adjustment
• Gas spring with 18 kg lifting force
• Solid and durable
• Stable aluminium die-cast base
• Lightweight construction

• 1/4” screw mounting
• Aluminium construction
• Integrated cable management system
• Fillable pillar
• Adjustable feet
• Rubber feet

• 1/4” screw mounting
• Aluminium construction
• Integrated cable management system
• Fillable pillar
• Adjustable feet
• Rubber feet

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• Gold coated connectors
• Full range sound
• High and low-level inputs
• 35-20KHz frequency response

• Gold coated connectors
• Full range sound
• High and low-level inputs
• 33-20KHz frequency response

• 6.5" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 103 dB SPL
• Single Point-Source Coaxial Design
• Wide Sweet Spot, Precise Phase Alignment
• Control Level, HPF, MF Trim, and HF Trim