The Neutrik NPPA-TT-IDC 96 Bantam (TT) Termination Patch Panel is fitted with high-quality, long-life NJ3TTA gold plated double contact jacks that have good contact integrity. The unit comes in a black coated steel shell, and has a built in cable bar and 2 large channel identification strips for appropriate management of the system. The NPPA-TT-IDC patch panel is a compact patching system (1U high) for 19" rack mounting.
Features
- Compact patching system (1U high) for 19" rack mounting
- Housed in a black coated steel shell
- High-quality gold plated Neutrik pre-wired double jacks with good contact integrity
- Made for analogue and digital signals acc. to AES3, 48 kHz sampling frequency
- Fast and easy change of normalling with jumpers
- Flexible grounding system
Specifications
| Connection Type | Plug |
| Signal Type | Digital suitability acc. AES/EBU (3.072 Mbps and 6.144 Mbps) |
| Frequency Range | DC to >50 MHz |
| Suitability | Digital: Digital audio acc. to AES/EBU |
| Channel Separation | >100 dB @ 10 kHz, 600 terminated >40 dB @ 6 MHz, 110 terminated |
| Insulation Resistance | >10 O?@ 500 VDC |
| Contact Resistance | Connector: <20 mO |
| Contact Resistance | Switch: <25 mO |
| Dielectric Strength | 1,000 VDC |
| Housing | Jack: PA 66 blend |
| Contacts | Jack: CuSn6 tribor plated (0.2 µm AuCo over 2 µm NiP) |
| Casing | Steel and aluminium |
| Front Panel | AlMgSi 0.5 F22 |
| Temperature Range | -22 to 176° F (- 30 to 80° C) |
| Lifetime | >5,000 mating cycles |
| Insertion Force | <10 N |
| Withdrawal Force | > 8 N |
| Cable Retention | Force: 70 N maximum per cable retention bar |
| Depth | 7'' (178 mm) |
| Weight | 5.73 lb (2.6 kg) |
| Dimensions (W x H) | 19'' x 1U |
