| Model |
XDS3062A |
| Bandwidth |
60 MHz |
| Sample Rate |
1GS/s |
| Vertical Resolution (A/D) |
12 bits |
| Record Length |
40M |
| Waveform Refresh Rate |
75,000 wfms/s |
| Horizontal Scale (s/div) |
2ns/div - 1000s/div, step by 1 - 2 - 5 |
| Rise Time (at input, typical) |
≤3.5ns |
| Channel |
2 + 1 (external) |
| Display |
8" colour LCD, 800 x 600 pixels (optional 1024 x 768 pixels IPS display available) |
| Input Impedance |
1MΩ ± 2 %, in parallel with 15pF ± 5pF |
| Channel Isolation |
50Hz: 100: 1, 10MHz: 40: 1 |
| Max Input Voltage |
1MΩ ≤ 300Vrms; 50Ω ≤ 5Vrms |
| DC Gain Accuracy |
±1% |
| DC Accuracy |
average ≥ 16: ±(3% reading + 0.05 div) for △V |
| Probe Attenuation Factor |
0.001X - 1000X, step by 1 - 2 - 5 |
| LF Respond (AC, -3dB) |
≥5Hz (at input, AC coupling, -3dB) |
| Sampling Rate / Relay Time Accuracy |
± 1ppm |
| Interpolation |
sin(x) / x |
| Interval (△T) Accuracy (full bandwidth) |
Single: ±(1 interval time + 1ppm x reading + 0.6ns) Average > 16: ±(1 interval time + 1ppm x reading + 0.4ns) |
| Input Coupling |
DC, A C, and GND |
| Vertical Sensitivity |
1mV/div - 10V/div (at input) |
| Trigger Type |
Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, R S232, and CAN (optional) |
| Bus Decoding |
I2C, SPI, R S232, and CAN (optional) |
| Trigger Mode |
Auto, Normal and Single |
| Vertical Range |
±2V ( 1mv/div - 50mv/div), ±20V ( 100mv/div - 1V/div), ±200V (2V/div - 10V/div) |
| Line / Field Frequency (video) |
NTSC, PAL and SECAM standard |
| Cursor Measurement |
△V, and △ T between cursors |
| Automatic Measurement |
Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase, Preshoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B , Delay A→B , +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count |
| Waveform Math |
+, -, ×, ÷, FFT |
| Waveform Storage |
100 waveforms |
| Lissajous Figure Bandwidth |
full bandwidth |
| Lissajous Figure Phase Difference |
±3 degrees |
| Communication Interface |
USB host, USB device, Pass / Fail, LAN, and VGA (optional) |
| Frequency Counter |
available |
| Power Supply |
100 - 240 V AC, 50 / 60Hz, CAT II |
| Power Consumption |
<15W |
| Fuse |
2A, T class, 250V |
| Battery (optional) |
3.7V, 1 3200m A |
| Dimension (W × H × D) |
340 x 177 x 90 mm |
| Weight |
2.6 kg |