Light Stand Accessories

Phottix Stay-Put Sandbag II (Medium)

Holds up to 6 kg, Ships Empty, Double Zippered, Saddlebag Design.
In stock Ships tomorrow

Kupo KSD-1680C 15.9kg Touch-Fastener Empty Refillable Sandbag

Convenient Closure &Sturdy Handle
Usually ships in 8 - 12 weeks

Avenger C1000 Drop Ceiling Scissor Clamp

Zinc Steel Construction, 5/8" Stud
In stock Ships tomorrow

Manfrotto 143A Magic Arm with Bracket

An articulating arm the will support up to 3kg
In stock with NZ supplier Usually ships in 1 - 2 working days

Orca OR-81 Water / Sand Bag

  • Designed to carry water / sand
  • Dual layers of hook and loop fasteners
In stock Ships tomorrow

Orca OR-81B Water Bladder Pocket

  • Contain up to 6L
  • Use with the OR-81 water / sand bag
In stock Ships tomorrow

Manfrotto 244N Variable Friction Magic Arm

  • Authentic Italian standard
  • Lightweight and long lasting durability
  • Carries 3 kg
  • Variable friction and ergonomic knob
  • Standard-size attachments
Special Order Usually ships in 8 - 12 weeks

Impact Empty Saddle Sandbag Kit, Set of 6 - 12 Kg (Black)

A set of 6 black, double zippered bags that ship empty
In stock with supplier Usually ships in 6 - 9 working days

Impact Empty Saddle Sandbag - 8kg (Black)

Used for securing the bases of light stands and set walls
In stock with supplier Usually ships in 6 - 9 working days

K&M 21393 Crossbar

Crossbar Section, Use with Light & Speaker Stands
Usually ships in 2 - 3 working days

Manfrotto LBAG110 - Light Stand Bag

  • For 3 Quick Stack Light Stands up to 109.2 cm
  • Padded Cordura Nylon Bag
  • Attached Shoulder Strap with Pad
Usually ships in 2 - 3 weeks

Manfrotto 196AB-2 Articulated Arm

A 2 section articulated arm with bracket that can support up to 1.5kg
In stock Ships tomorrow

Impact Telescopic Collapsible Reflector Holder

The Impact Telescopic Collapsible Reflector Holder is ideal for mounti
In stock with supplier Usually ships in 6 - 9 working days

Manfrotto 396B-2 Double Articulated Arm - 2 Sections With Camera Bracket

  • Double articulated arms, to support loads up to 5 kg
  • Very lightweight, weighs 0.64 kg
  • Two sections articulated arm, max length 62.5 cm
  • Sliding extension allow for flexible positioning.
  • Supplied with camera bracket
In stock Ships tomorrow
$199.00
You Pay: $174.00

Impact 40" Extension Grip Arm (Silver)

Large T-Handle, Universal 2.5" Grip Head, 5/8" Diameter Bar
In stock with supplier Usually ships in 6 - 9 working days

Manfrotto 244 Variable Friction Magic Arm with Camera Bracket

  • Meets high Italian standards
  • Stretches 53 cm in length
  • Secure locking function
  • 035 Super Clamp to add more accessories
Usually ships in 2 - 3 weeks

9.SOLUTIONS Double El-Bo Arm

  • Load Capacity: 6.0 kg
  • 5/8" Pin with 3/8" Female Thread
  • 3/8"-16 Male Thread
In stock Ships tomorrow
$309.00
You Pay: $274.00

Phottix Cerberus Multi Mount Kit

For use with hot shoe flashes.
Usually ships in 2 - 3 working days

Impact Empty Sandbag - 12.2kg (Black Cordura)

Used for securing the bases of light stands and set walls
In stock with supplier Usually ships in 6 - 9 working days

Manfrotto FF3512N86 Pantograph with Wire Cable

An option for lights to be suspended - supports up to 18kg
Special Order Usually ships in 8 - 12 weeks

9.SOLUTIONS EX-SUS Extension Suspension Pole

Load Capacity: 20kg, Telescoping Design: 110-198 cm
In stock Ships tomorrow
$249.00
You Pay: $221.00

9.SOLUTIONS 3/8" Rod Set (500mm)

Aluminum Construction, 3/8" Rods and Thread
In stock Ships tomorrow

9.SOLUTIONS Quick Mount Gooseneck

Magnetic Grip, Flexible Arm, Length: 25cm, Instant Thread Alignment
In stock Ships tomorrow

9.SOLUTIONS El-Bo Arm

Load Capacity: 33 lb, 5/8" Pin with 3/8" Female Thread
In stock Ships tomorrow
$159.00
You Pay: $145.00

9.SOLUTIONS Double Joint Arm (Long, 660mm)

2x 5/8" Pins with 3/8"-16 Female Thread, Load Capacity: 11 lb
In stock Ships tomorrow
$199.00
You Pay: $174.00

9.SOLUTIONS Double Joint Arm (Medium, 460mm)

2x 5/8" Pins with 3/8"-16 Female Thread, Load Capacity: 9kg
In stock Ships tomorrow

Manfrotto 196B-3 Articulated Arm

  • Payload 1 kg at full extension
  • Very lightweight, weighs 0.63 kg
  • Three sections articulated arm, max length 85 cm
  • Sliding extension allow for flexible positioning.
  • Supplied with camera bracket
Usually ships in 2 - 3 weeks

9.SOLUTIONS 5/8" Rod Set (1000mm)

1-Set of 1000mm Long Rods, 3/8"-16 Threads on Both Ends of the Rod
In stock Ships tomorrow

9.SOLUTIONS Double Joint Arm (Short, 360mm)

2x 5/8" Pins with 3/8"-16 Female Thread, Load Capacity: 30.8 lb
In stock Ships tomorrow
$169.00
You Pay: $152.00

9.SOLUTIONS Snap-in Socket

  • Mounts to any 3/8"-16 male thread
  • 3/8" Female Thread, 5/8" Receiver
  • Enables 1-hand operation
In stock Ships tomorrow
$44.95
You Pay: $41.00

Manfrotto 237 Flexible Arm

A flexible arm designed to be used with the super clamp -12mm diameter
Special Order Usually ships in 8 - 12 weeks

Tether Tools Rock Solid 22" Telescoping Arm

  • Aluminium Construction
  • 34.6 to 55.8 cm extension
  • 3/8" Baby (5/8") Studs at Each End
In stock Ships tomorrow

9.SOLUTIONS 5/8" Rod Connectors (Set of 6)

Available to order today
In stock Ships tomorrow

9.SOLUTIONS 5/8" Rod Set (500mm)

1-Set of 500mm Long Rods, 3/8"-16 Threads on Both Ends of the Rod
In stock Ships tomorrow

9.SOLUTIONS 5/8" Rod Set (250mm)

  • 1-Set of 9.8" Long Rods
  • 3/8"-16 Threads on Both Ends of the Rod
  • Includes One Rod Connector
  • Used for Rigging Lights and Cameras
  • Used with a Variety of Other Accessories
In stock Ships tomorrow

Manfrotto 143N Magic Arm without Bracket

  • Meets leading Italian standards
  • Robust aluminium supports < 3 kg
  • Reaches up to 53cm for ultimate practicality
  • Maximum flexibility
  • Inbuilt locking lever
Special Order Usually ships in 8 - 12 weeks

Manfrotto 271 Panel Clamp (Black)

  • Clamps onto rounded square tubes
  • 5/8" female socket
Usually ships in 2 - 3 weeks

9.SOLUTIONS 5/8" Rod Set (150mm)

  • 1-Set of 5.9" Long Rods
  • 3/8"-16 Threads on Both Ends of the Rod
  • Includes One Rod Connector
  • Used for Rigging Lights and Cameras
  • Used with a Variety of Other Accessories
In stock Ships tomorrow

9.SOLUTIONS 3/8" Rod Set (150mm)

  • Aluminium Construction
  • 3/8" Rods and Thread
In stock Ships tomorrow

Manfrotto 237HD Flexible Arm

A flexible arm designed to be used with the super clamp -18mm diameter
In stock with NZ supplier Usually ships in 1 - 2 working days

9.SOLUTIONS 5/8" Dual Knob Gag

Individual Clamping on Both Sides of Gag
In stock Ships tomorrow

9.SOLUTIONS 3/8" Gag

  • Revolving 3/8" and 5/8" Receptacle
  • Accepts Optional Pass-Through Rods
In stock Ships tomorrow

9.SOLUTIONS Grip Joint

  • Revolving 3/8" and 5/8" Receptacle
  • Accepts Optional Pass-Through Rods
In stock Ships tomorrow

Manfrotto 196AB-3 Articulated Arm

An articulated arm with 3 sections that can support up to 1.0kg
Special Order Usually ships in 8 - 12 weeks

9.SOLUTIONS 5/8" Open Gag

Joins Two 5/8" Rods,, Allows 360° Positioning
In stock Ships tomorrow

Phottix Varos Pro M Multi-Function Flash Shoe Umbrella Holder

Supports up to 62 lb (28 kg), Female Threaded Insert, Metal Cold Shoe.
Usually ships in 2 - 3 working days

Manfrotto 042 Extension Arm

A clamp designed to fit into a Super Clamp 035 socket - 19.5cm long.
Special Order Usually ships in 8 - 12 weeks

Avenger C1100 Sparrow Plate

Zinc-plated Steel Construction, 5/8" Stud
Special Order Usually ships in 8 - 12 weeks

Fiilex Power Adapter Holder

  • Mounts on Light Stand
  • Keeps Power Adapters Off the Floor
  • Attaches to DMX Connection Box
Usually ships in 2 - 3 weeks

Avenger C1005 Scissor Clip with Cable Support

Zinc-plated Steel Construction, For Drop Ceilings
Special Order Usually ships in 8 - 12 weeks

1 2 Next >