(no ratings yet) Thanks for your rating!
The Celestron Digital Camera Adapter places your various point-&-shoot digital cameras close to the eyepiece of your spotting scope. It has a clamp for the eyepiece and various location adjustments so that you get the digital camera centred exactly where it needs to be for the best images with high resolution and no vignetting. As with all digiscoping, it is far easier to align the digital camera's lens with the scope's eyepiece when that eyepiece has a broad, flat rear element-making a bigger target for the camera's vision to fit within.
To describe here exactly which cameras work with this is simply impossible, but for some guidance...the shortest distance between the tripod socket and the centre of the eyepiece is approximately1.26" ( 32mm), while the longest distance between the centre of the eyepiece and the tripod socket is approximately2.91" ( 74mm). The tripod socket can be as far as approximately 2.12" ( 54mm) to either side of the centre of the eyepiece, so as long as the distance between your camera's tripod socket and the centre of its lens is less than this it should likely fit.
As with all ventures in the world of digiscoping, you'll need to employ good technique and good equipment to get good pictures-which means a sturdy tripod and secondary support for the camera if possible, a sensibly-high shutter speed for the digital camera and as much care as is possible to prohibit camera movement. This should always include the use of the camera's electronic shutter release cable or remote control if the camera has such capacity. Note: A tripod spacer-like that used under traditional film cameras with Polariod film backs-is often necessary for vertical alignment of cameras with a short distance between their tripod socket and the centre of their lens. An inexpensive combination of 2 pieces of inventory to solve the problem (B&H item codes "BO3358" and "GIG1141") is listed here as accessories.
- Attaches directly to eyepieces with 1.18-2.36" ( 30-60mm) outer diameter
- Camera's height to eyepiece adjustable in ±1.18" ( ±30mm) range
- Camera's tripod socket adjustable in ±1.65" ( ±42mm) range
- Includes 1/4"-20 threaded tripod socket upon base for added support
||4.50 lb ( 2.04 kg)
||4.9 x 7.1 x 4.4" ( 125 x 180 x 111 mm) WxHxD
||0.89 lb ( 405 g)