Radial Engineering Tonebone Bassbone V2 Bass Preamp and DI Box
Features
- 2-Channel Bass Preamp
- Drive 2 Basses to Amp or PA
- EQ & Volume Control Per Channel
- Switchable Effects Loop
- Boost/Mute Function
- Balanced XLR Output
Description
The Radial Engineering Tonebone Bassbone V2 Bass Preamp and DI Box is a 2-channel preamp that allows you to connect 1 or 2 basses to a single amplifier, PA, or recording destination, and also includes a boost function and switchable effects loop. Each channel offers independent level control for matching signals, along with independent EQ to suit different basses or styles. A balanced XLR output lets you connect to a PA or recording interface, while the 1/4" amplifier out allows you to hit your amp simultaneously.
A boost/mute switch allows you to either boost your signal, or mute it entirely. The effects send can be switched on and off, and even includes a blend knob that lets you adjust your wet/dry blend, and can be applied to channel 1 or channel 2, or both. A piezo booster allows you to connect a piezo pickup with no signal loss.
Specifications
Audio Circuit Type | Discrete class-A FET input with low noise ICs |
Frequency Response | 20 Hz to 18 kHz |
Total Harmonic Distortion | 0.05% @ -15 dBu |
Intermodulation Distortion | 0.2% @ -20 dBu |
Dynamic Range | 85 dB |
Input Impedance | Input A: 220 kOhms Input B: 220 kOhms/10 MOhms |
Output Impedance | 300 ohms @ XLR |
Maximum Input | +7 dBu |
Gain | Unity gain device |
Gain Boost | Gain Boost Drive: 0 to 25 dB |
Noise Floor | -100 dB |
Equivalent Input Noise | -92 dBu at XLR |
High Pass Filter | Flat, 35 Hz and 60 Hz (6 dB/Octave) |
XLR Configuration | Pin 2 +, Pin 3 -, Pin 1 Ground |
Ground Lift | Lifts pin-1 on the XLR |
Power | +15 VDC/400 mA adapter included |
Construction | 14-gauge steel |
Operating Conditions | Use in dry locations only between 41 to 104°F (5 to 40°C) |
Dimensions | 203 x 107 x 48 mm |
Weight | 1157 g |
In The Box
- Radial Engineering Tonebone Bassbone V2 Bass Preamp and DI Box
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Radial Engineering Tonebone Bassbone V2 Bass Preamp and DI Box
- Manufacturer: Radial
- Model: RA-BASSBONE-V2
- SKU: RA-BASSBONE-V2
- RM Product #: 96213
- Warranty: 5 year manufacturer warranty