The Sennheiser E912 S-BK - Condenser Boundary Microphone is a pre-polarized boundary microphone optimized for speech and instrument pick up. Its half-cardioid condenser element is ideal for capturing theater productions, discussions in boardrooms, conferences and more. A programmable, momentary switch provides push-to-talk, push-to-mute and on/off functions. The compact, flat profile is ideal for pianos and other instruments best captured while surface mounted. An integrated preamplifier provides a standard gold-plated XLR output right from the microphone.
is a pre-polarized boundary microphone optimized for speech and instrument pick up. Its half-cardioid condenser element is ideal for capturing theater productions, discussions in boardrooms, conferences and more. A programmable, momentary switch provides push-to-talk, push-to-mute and on/off functions. The compact, flat profile is ideal for pianos and other instruments best captured while surface mounted. An integrated preamplifier provides a standard gold-plated XLR output right from the microphone.
- Programmable Membrane Switch - A programmable, momentary switch provides push-to-talk, push-to-mute and on/off functions.
- Optimized Frequency and Sensitivity Response - The wide frequency response and sensitivity are ideal for capturing both vocals and instruments.
- Low Profile - Its unobtrusive, low profile design is ideal for stage and piano mounting.
- Shock Absorbing Base - minimizes noise due to residual vibration.
Features
- Frequency response and sensitivity optimized for picking up instruments, vocals and speech
- Unobtrusive, flat housing
- Extremely rugged and step-resistant
- Shock-absorbing rubber base
- Mounting slots for table installation
- Gold-plated XLR connector
- Integrated pre-amp
Delivery Includes
- e 912 Microphone
- Pouch
- User manual
Specifications:
- Transducer: Permanently Polarized Condenser
- Polar Pattern: Half-Cardioid
- Frequency Response: 20Hz to 20kHz
- Signal-to-Noise Ratio: 26dB (A)
- Maximum Input Sound Level: 135.6dB SPL (active)
- Power Requirement: 48V 1.1 mA
- Output Impedance: < 100 Ohm (nominal)
- Output Connectors: 3-pin XLR
- Pad: No
- Low Frequency Roll-Off: No
- Dimensions: 126.5 x 105 x 26.5mm
- Weight: 550g
