Shure BLX188-CVL Dual-Channel Lavalier Wireless System
Features
- M15 Frequency Band
- BLX88 Dual-Channel Wireless Receiver
- 2x BLX1 Bodypack Transmitters
- 2x CVL Centraverse Lavalier Microphones
- One-Touch QuickScan Frequency Selection
Description
The BLX188/CVL Dual-Channel Dual Lavalier Wireless Mic System from Shure includes a BLX88 dual-channel wireless receiver, 2 BLX1 bodypack transmitters, 2 CVL Centraverse lavalier microphones, and 4 AA batteries. The system is set to Shure's M15 frequency band and operates between 662 - 686 MHz.
The BXL1 bodypack transmitters have a 91.44 m line of sight operation range with the BLX88 receiver. They are each powered by two included AA batteries that can provide up to 14 hours of operation. The BLX88 receiver features microprocessor-controlled internal antenna diversity that helps prevent interference and signal dropouts. Its one-touch QuickScan feature detects the most interference-free frequency and sets the channel to it for fast setup.
The CVL Centraverse Lavalier Condenser Microphone from Shure is a miniature lavalier condenser microphone that is optimised for speech and vocal performance. A tie clip and windscreen are included.
The BLX1 Bodypack Transmitter from Shure is designed for use with Shure's BLX wireless systems. It is set to the M15 frequency band and operates between 662 and 686 MHz. It has a TQG input and can be used with Shure lavalier, headset, earset and instrument microphones. With the optional WA302 adapter cable, the BLX1 can be used as a transmitter for guitar. The unit has a top panel mounted on/off switch as well as volume control for quick access while speaking or performing. The BLX1 is powered by the two included AA batteries for up to 14 hours.
The BLX88 Dual-Channel Wireless Receiver from Shure is a dual-channel receiver set to Shure's M15 frequency band and operates between 662 to 686 MHz. It has microprocessor-controlled internal antenna diversity for reduced signal interference and dropouts. The one-touch QuickScan frequency selection feature allows you to quickly locate the frequency with the least amount of interference available.
Its front-panel dual-colour LED status indicator displays green for normal levels and red when clipping for fast metering. It has two XLR outputs in additional to two instrument-level 1/4" outputs. The BLX88 can be used with up to 11 other compatible systems simultaneously per frequency band.
Features
- Designed for low visibility
- Permanently charged electret condenser element for vocal reproduction
- TA4F (TQG) connector integrates with Shure wireless bodypack systems
- Tailored frequency response optimised for public speaking and presentation
Specifications
| CVL Centraverse Lavalier Condenser Microphone | |
| Type | Electret condenser |
| Frequency Response | 50 Hz to 20 kHz |
| Polar Pattern | Cardioid |
| Output Impedance | 600 Ω @ 1 kHz, typical |
| Audio Output Level | -43.5 dBV/Pa |
| Signal to Noise Ratio | 72 dB @ 1 kHz |
| Maximum SPL | 139 dB, @ 1 kHz (1,000 Ω load) |
| Dynamic Range | 117 dB, @ 1 kHz (1,000 Ω load) |
| Output Noise | 22 dB, typical, A-weighted |
| Power Requirements | +5 V DC (nominal), 10 V maximum (DC bias) |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 |
| Cable | 1.3 m |
| Connector | TA4F |
| Weight | 25 g |
| BLX1 Bodypack Transmitter (M15: 662 - 686 MHz) | |
| Audio Input | Gain: -16 dBV (Maximum), 10 dBV (Minimum) |
| Gain Adjustment Range | 26 dB |
| Input Impedance | 1 MOhm |
| RF Output | 10 mW, Typical |
| Housing | Moulded ABS |
| Power Requirement | 2x LR6 AA Batteries, 1.5 V Alkaline |
| Battery Life | Up to 14 Hours |
| Dimensions (H x W x D) | 110 x 64 x 21 mm |
| Weight | 75 g |
| BLX88 Dual-Channel Wireless Receiver (M15: 662 - 686 MHz) | |
| Output | 2x XLR Output 2x 1/4" (6.35 mm) Output |
| Output Impedance | XLR: 200 ohms 1/4": 50 ohms |
| Audio Output Level | XLR Connector: -20.5 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone) 1/4": -13 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone) |
| RF Sensitivity | -105 dBm for 12 dB SINAD, Typical |
| Image Rejection | >50 dB, Typical |
| Housing | Moulded ABS |
| Power Requirement | 12 to 15 VDC @ 320 mA, Supplied by External Power Supply (Tip Positive) |
| Dimensions (H x W x D) | 40 x 388 x 116 mm |
| Weight | 429 g |
In The Box
- 2 x CVL Centraverse Lavalier Condenser Microphone
- Tie Clip
- Windscreen
- 2 x BLX1 Bodypack Transmitter (M15: 662 - 686 MHz)
- 2 x AA Batteries
- BLX88 Dual-Channel Wireless Receiver (M15: 662 - 686 MHz)
- Power Supply
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Shure BLX188-CVL Dual-Channel Lavalier Wireless System
- Manufacturer: Shure
- Model: BLX188/CVL
- SKU: BLX188/CVL
- RM Product #: 18310
- Element Type: Condenser
- Polar Pattern: Cardioid
- Warranty: 2 year manufacturer warranty (excluding consumable e.g. lithium-ion batteries).
Recently Viewed
View AllShure BLX188-CVL Dual-Channel Lavalier Wireless System
