Synology DX517 5-Bay Expansion Enclosure
- For the DS1819+, DS1817+, and DS1817
- For the DS1618+, DS1517+, DS1517
- For the DS918+, DS718+, and DS218+
- For the NVR1218
- 5 x 3.5"/2.5" SATA Drive Bays
Email me when stock arrives
Built to support on-the-fly volume expansion and local backups, the DX517 5-Bay Expansion Enclosure from Synology adds an additional five 3.5"/2.5" SATA drive bays to their DS1819+, DS1817+, DS1817, DS1618+, DS1517+, DS1517, DS918+, DS718+, DS218+, and NVR1218. Its drive bays are hot-swappable and screwless, and included is an AC power cord, an accessory pack, and an eSATA expansion cable. Protection is provided by a limited 3-year warranty.
5-Bay 3.5"/2.5" SATA Expansion
Add five additional drive bays to your Synology DiskStation DS1817+ and DS1517+. Supporting 2.5" SATA hard drives and SSDs, as well as 3.5" SATA hard drives, the DX517 is a flexible solution supporting on-the-fly volume expansion or serving as a local backup destination.
Online Volume Expansion
Managed from DiskStation Manager on the host NAS, the additional bays in the DX517 are immediately ready to be used once connected. On-the-fly volume expansion helps ensure that storage and services on the host are not interrupted during volume expansion.
Hot-Swappable Drive Tray Design
The hot-swappable drive trays of DX517 allow drive installation and replacement without powering down the system. A screwless drive tray design also helps reduce the time needed for system setup.
Dedicated Local Backup Solution
Synology's DX517 can be used as a dedicated local backup solution for the Synology DiskStation DS1817+ or DS1517+. When created as a separate volume, the DX517 provides a great backup solution to its local hard disks in case of system failure.
|Number of Bays||5 x 2.5"/3.5"|
|Media Card Slots||None|
|Connections||1 x eSATA|
|Compatible Drive Interface||SATA III|
|Link Aggregation and Failover Support||No|
|Wake on LAN||No|
|Total Raw Capacity||None|
|Power Consumption||29.9 W (Typical)
2.4 W (Standby)
|Power Source||Internal Power Supply|
|PSU Wattage||1 x 200 W|
|AC Input Power||100 to 240 VAC, 50 / 60 Hz|
|Operating Temperature||40 to 104°F / 4 to 40°C|
|Operating Humidity||5 to 95%|
|Storage Temperature||14 to 158°F / -10 to 70°C|
|Certifications||BSMI, COE, FCC, RoHS, as per Manufacturer|
|Cooling||2 x 80 mm Fans|
|Noise Level||21.5 dBA|
|Dimensions||6.2 x 9.8 x 9.2" / 157 x 248 x 233 mm|
|Weight||8.6 lb / 3.9 kg|