Teradek: Accessories

Teradek 18" 2-pin Lemo to PowerTap Adapter Cable

  • Power Cable for Cube, Bolt, Bond, Link
  • 46 cm length
  • 2-Pin LEMO to P-Tap male
Usually ships in 3 - 4 weeks

Teradek 4-Pin LEMO to 2-Pin LEMO Cable (18")

Available to order today
In stock Ships today

Teradek 2-Pin Lemo to Flying Leads Cable (18")

  • Two-Wire Flying Leads End
  • For ground and power
  • Works with Bolt, Bond, Link, Many Cubes
Usually ships in 3 - 4 weeks

Teradek Barrel to Barrel Power Cable (18")

  • Connect SWIT Battery to Clip or Vidiu
  • 46 cm length
  • Barrel connectors
In stock Ships today

Teradek Protective Case for Teradek Beam Kit

  • Hold transmitter, receiver, antenna array
  • Ultra high-strength
  • Water and dust-tight
  • Automatic ambient pressure equalisation valve
Usually ships in 3 - 4 weeks

Teradek Protective Waterproof Utility SKB Case for Antenna Array and Bolts

  • Waterproof and dust-tight design
  • Moulded-in hinge for added protection
  • Trigger release latch system
  • Resistant to impact damage
  • Ambient pressure equalisation valve
Usually ships in 3 - 4 weeks

Teradek B Series Battery Plate for Bolt Pro 300/600/2000 Transmitters & Receivers

  • Accepts Sony B Series Batteries
  • LEMO-Type Cable Termination
  • Power Tonahawk2 Transmitter/receiver
Usually ships in 3 - 4 weeks

Teradek 2-Pin Lemo to 4-Pin Hirose (12")

  • Connect Sony F5/F55 to Teradek Cube or Bolt
  • 30.5 cm length
  • 2-Pin Lemo to 4-Pin Hirose
Usually ships in 3 - 4 weeks

Teradek Zixi License for Cube Encoder/Decoder Pair

Available to order from Rubber Monkey today
Usually ships in 3 - 4 weeks
You Pay: $1,699.00

Teradek 11-0024 Replacement Antenna for the Bit Pro 600 Wireless Transmitter/Receiver

  • Replacement Antenna
  • For the Bit Pro 600 Transmitter/Receiver
  • 1x 75 Ohms BNC Connector
In stock with supplier Usually ships in 1 - 2 days

Teradek Panasonic D54 Battery & 10" Barrel Adapter to 2-Pin Lemo Cable

  • Battery Solution for Teradek Bond
  • DC barrel to 2-Pin LEMO
  • 25.4 cm cable length
  • Operate from remote locations
Usually ships in 3 - 4 weeks

Teradek Dual-Gold-Mount Battery Plate for Bolt Pro 300/600/2000 Transmitters

  • Surrounds Bolt Pro Transmitter Chassis
  • Mounts Bolt Pro to Camera Battery Plate
  • D-Tap Output
  • Power pass-through plate
Usually ships in 3 - 4 weeks

Teradek 2-Pin Lemo to Barrel Adapter Cable (10")

  • Powers Bond via Teradek Batteries
  • Cable length of 25 cm
  • 2-Pin LEMO to Barrel
  • Connects to any Teradek batteries
Usually ships in 3 - 4 weeks

Teradek 7.2V Replacement Battery for Panasonic CGA-D54 Battery

  • Replacement battery
  • For Panasonic CGA-D54 Battery
  • Barrel to barrel adapter
  • 25.54 cm cable
Usually ships in 3 - 4 weeks

Teradek 7.2V Replacement Battery for Canon BP945/970G Batteries

  • Replacement battery
  • For Canon BP945/970G batteries
  • 25.4 cm cable
  • Barrel to barrel adapter
Usually ships in 3 - 4 weeks

Teradek Sony PMW-EX1/EX3 Battery & 18" 2-Pin Lemo to PowerTap Cable

  • Battery Solution for Teradek Bond
  • 45.7 cm cable
  • 2-Pin LEMO to PowerTap
  • Operate in remote locations
Usually ships in 3 - 4 weeks

Teradek BIT-708 6" 2-Pin Lemo Cable

  • ARRI Alexa Power Connection
  • 2-Pin LEMO Connectors
  • 15 cm distance length
Usually ships in 3 - 4 weeks

Teradek 2-Pin LEMO to XLR Cable (18")

  • For the Bond Cellular Transmitter
  • 2-Pin LEMO to 4-Pin XLR
  • 45.7 cm length
Usually ships in 3 - 4 weeks

Teradek 6W AC Adapter for Bolt, Cube, Bond (4-Pin LEMO)

  • For 4-Pin Cube, Bolt, Bond Models
  • U.S. Plug to 4-Pin LEMO
  • 1.8 m Cable
  • International Socket Adapters Included
Usually ships in 3 - 4 weeks

Teradek Battery Adapter Plate for Panasonic VW-VBG6 or CGA-E/625 Battery

  • Mounts Panasonic VW-VBG6 or CGA-E/625 Battery
  • For Teradek Bond Cellular Solution
  • 2-Pin LEMO Connector
In stock with supplier Usually ships in 1 - 2 days

Teradek Battery Adapter Plate for Panasonic CGA-D54 Battery

  • Mounts Panasonic CGA-D54 Battery
  • For Teradek Bond Cellular Solution
  • 2-Pin LEMO Connector
Usually ships in 3 - 4 weeks

Antenna Array for Bolt Rx

Offers a more resilient wireless transmission
Usually ships in 3 - 4 weeks

Teradek Panasonic VW-VGB6 Battery & 10" Barrel Adapter to 2-Pin Lemo Cable

  • Battery Solution for Teradek Bond
  • 25.4 cm Barrel adapter to 2-Pin LEMO
  • Allows remote operation
Usually ships in 3 - 4 weeks

Teradek Gold-Mount Battery Plate for Bolt Pro 300/600/2000 Receivers

  • Power Bolt Pro 300, 600, 2000
  • P-Tap accessory output
Usually ships in 3 - 4 weeks

Teradek M Series Battery Plate for Bolt Pro 300/600/2000 Transmitters & Receivers

  • Accepts Sony M Series Batteries
  • LEMO-Type Cable Termination
Usually ships in 3 - 4 weeks

Teradek VW-VBG6 Battery Plate for Bolt Pro 300/600/2000 Transmitters & Receivers

  • Accepts Panasonic VW-VBG6 Batteries
  • LEMO-Type Cable Termination
Usually ships in 3 - 4 weeks

Teradek CGA-D54 Battery Plate for Bolt Pro 300/600/2000 Transmitters & Receivers

  • Accepts Panasonic CGA-D54 Batteries
  • LEMO-Type Cable Termination
Usually ships in 3 - 4 weeks

Teradek BN-V438U Battery Plate for Bolt Pro 300/600/2000 Transmitters & Receivers

  • Accepts JVC BN-V438U Batteries
  • LEMO-Type Cable Termination
Usually ships in 3 - 4 weeks

Teradek BP-970 Battery Plate for Bolt Pro 300/600/2000 Transmitters & Receivers

  • Accepts Canon BP-970 Batteries
  • LEMO-Type Cable Termination
Usually ships in 3 - 4 weeks

Teradek Battery Adapter Plate for Sony B Series Battery

  • Mounts Sony B Series Battery
  • For Teradek Bond Cellular Solution
  • 2-Pin LEMO Connector
Usually ships in 3 - 4 weeks

Teradek Battery Adapter Plate for JVC BN-V438U Battery

  • Mounts JVC BN-V438U Battery
  • For Teradek Bond Cellular Solution
  • 2-Pin LEMO Connector
Usually ships in 3 - 4 weeks

Teradek Hotshoe Mounting Hardware for Cube

  • Compatible with Cube Encoders/Decoders
  • Mount to standard shoe mount
Usually ships in 3 - 4 weeks

Teradek L Series Battery Plate for Bolt Pro 300/600/2000 Transmitters & Receivers

  • Accepts Sony L Series Batteries
  • LEMO-Type Cable Termination
Usually ships in 3 - 4 weeks

Teradek Battery Adapter Plate for Canon BP-970G Battery

  • Mounts Canon BP-970G Battery
  • For Teradek Bond Cellular Solution
  • 2-Pin LEMO Connector
Usually ships in 3 - 4 weeks

Teradek Bits 056 AC Adapter (18 W)

  • Compatible with Bolt and Cube Units
  • Interchangeable, International AC Plugs
  • Length of 1.8 m
  • 2-Pin LEMO connector
Usually ships in 3 - 4 weeks

Teradek Canon BP-945 Battery & 10" Barrel Adapter to 2-Pin Lemo Cable

  • Battery Solution for Teradek Bond
  • 25.4 cable length
  • Barrel adapter to 2-Pin LEMO
  • Operate in remote locations
Usually ships in 3 - 4 weeks

Teradek MPEG Transport Stream License for Cube Encoders

  • Create an MPEG-TS over IP
  • Compatible with TV broadcast equipment
Special Order Usually ships in 14 - 21 days

Teradek Protective Case for Teradek Cube Encoder/Decoder

  • Hard case
  • Holds two encoders/decoders
  • Provides protection
Usually ships in 3 - 4 weeks

Teradek Beam Receiver Antenna Array with Case

  • 5.1-5.8 GHz MIMO Panel Antenna
  • Enhances Wireless Video Transmission
  • Focuses Signal and Reduces Interference
  • 3x16 dBi / 2x14 dBi Antenna Array
  • Waterproof Carrying Case Included
Usually ships in 3 - 4 weeks
You Pay: $1,339.00

Teradek Antenna Array for Beam Receiver

  • 5.1-5.8 GHz MIMO Panel Antenna
  • Enhances Wireless Video Transmission
  • Focuses Signal and Reduces Interference
  • 3x16 dBi / 2x14 dBi Antenna Array
Usually ships in 3 - 4 weeks

Teradek Replacement Dual-Band Wireless Antenna

  • For Cube Encoders & Decoders
  • Replacement antenna
Usually ships in 3 - 4 weeks

Teradek V-Mount Battery Plate for Bolt Pro 300/600/2000 Receivers

Power your Bolt Pro 300, 600, or 2000 receiver using a V-Mount battery
Usually ships in 3 - 4 weeks

Teradek Gold-Mount Battery Plate for Bolt Pro 300/600/2000 Transmitters

  • Power you Bolt Pro transmitters
  • Use Gold mount 14.4 V battery
  • P-Tap accessory output
  • 27 cm cable length
  • P-Tap to 2-Pin connectors
Usually ships in 3 - 4 weeks

Teradek Dual-Gold-Mount Battery Plate for Bolt Pro 300/600/2000 Receivers

Surrounds Bolt Pro Receiver Chassis, D-Tap Output
Usually ships in 3 - 4 weeks

Teradek Dual-V-Mount Battery Plate for Bolt Pro 300/600/2000 Receivers

Surrounds Bolt Pro Receiver Chassis, D-Tap Output
Usually ships in 3 - 4 weeks

Teradek Bolt Receiver Antenna Array with Case

Offers a more resilient wireless transmission
Usually ships in 3 - 4 weeks
You Pay: $1,339.00

Teradek LP-E6 Battery Plate for Bolt Pro 300/600/2000 Transmitters & Receivers

Available to order from Rubber Monkey today
Usually ships in 3 - 4 weeks

Teradek Wireless Antenna for Bolt Pro 2000 Transmitter

  • Replacement Antenna
  • For Bolt Pro 2000 transmitter
Usually ships in 3 - 4 weeks

Teradek 7.2V Replacement Battery for Sony NPF970/770 Batteries

  • Replacement battery
  • For Sony NPF970/770 batteries
  • 25.4 cm adapter cable
  • Barrel to Barrel
Usually ships in 3 - 4 weeks

Teradek V-Mount Battery Plate for Bolt Pro 300/600/2000 Transmitters

  • For BolPro transmitters
  • D-Tap accessory output
  • 27cm D-Tap to 2-Pin cable
Usually ships in 3 - 4 weeks

1 2 Next >