Product Features
  • 8.2"(21 cm) IPS Panel with LED Backlight
  • 1280 x 800 Resolution / 800:1 Contrast
  • 360 Nit Bright / 160° Viewing Angle
  • 3G-SDI, HDMI, Analogue BNC, and RCA Audio
  • 16 Channel SDI Audio Level Metering
Our Price $3,749.00


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
$9.74
South Island
$14.09

The JVC DT-V9L5U 8.2" Broadcast Studio Monitor features a 16:10 widescreen, active matrix, TFT LCD with a gloss surface and an LED backlight. The resolution is 1280 x 800, contrast ratio 800:1, and brightness 360 nit. The viewing angle is 160°. The monitor powers by an included AC adapter.

Front panel controls include phase, chroma, brightness, and contrast adjustment knobs, and input selection and marker buttons. The front panel also has a wide-sized tally light, and a second tally light is on the rear.

Key Features

  • 8.2"(21 cm) IPS panel with 1280 x 800 resolution
  • Mercury-free white LED backlight
  • 800:1 contrast ratio
  • 360 nit brightness
  • 160 x 160° viewing angle
  • 16 channel SDI audio level metering
  • Area/Centre/Aspect marker
  • SDI timecode display
  • Front and rear tally lamps
  • 1W internal mono speaker
  • AC adapter included
  • Tabletop stand included
  • Supports Anton Bauer battery plates on the rear

Inputs / Outputs

  • Two 3G/HD/SD-SDI inputs and one switched out output
  • Bridge-connected Composite BNC input and output
  • HDMI input
  • Component input on 3x BNCs
  • RCA audio input on one connector
  • RCA L/R audio output
  • Front panel headphone jack
  • RJ-45 Make/Trigger
  • D-Sub9 RS-232C

Image Analysis Tools

  • Waveform
  • Vectorscope
  • Underscan / Overscan
Screen8.2" wide, active matrix TFT LCD (21 cm)
LED backlight
Effective Screen SizeW x H x D: 7 x 4.3 x 4.2 (18 x 11 x 21 cm)
Resolution1280 x 800
Colours16.7 million
Viewing Angle80° H, 80° V
Brightness360 nit
Contrast Ratio800:1
Aspect Ratio16:10
Input & Output3G/HD/SD-SDI input (embedded audio supported)
2x auto detecting BNC connectors

HD-SDI output switched out (embedded audio supported)
1x auto detecting BNC connector

HDMI input:
1x HDMI, HDCP-compatible

Composite input/output:
1x line on 2x BNC connectors, 1 V (p-p), 75 Ω
The input and output terminals are bridge-connected (auto termination)

Component input:
1x line on 3x BNC connectors
Y: 1 V(p-p), 75 Ω(with sync)
PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω

RCA audio input:
1x RCA connector, 500 mV (rms), high impedance

RCA audio output:
2x RCA connectors, 500 mV (rms)
500 mV (rms)

1x headphone jack

Remote (Make/Trigger):
1x RJ-45, contact or momentary pulse to corresponding terminal

Remote (RS-232C):
D-Sub9, serial communication
FormatHD-SDI: SMPTE292M
SD-SDI: ITU-R BT.656, SMPTE259M
Embedded Audio 16 Ch: SMPTE299M, SMPTE272M
TimecodeSDI timecode
Audio OutputInternal speaker: 1 W
Audio MeteringDigital (up to 16 ch)
Power RequirementsAC 120 V / AC 220 - 240 V, 50/60 Hz or DC 12 - 17 V
Power input: 4-pin XLR
AC adapter included
Rated Current0.5 A (AC 120 V)
0.25 A (AC 220 - 240 V)
1.3 A (DC 12 - 17 V)
Operating Temperature5 to 35°C
Operating Humidity20 - 80% (non-condensing)
*Slightly variable depending on ambient conditions for installation
DimensionsWith stand: 8.6 x 8.6 x 7.5" (22 x 22 x 19 cm)
Without stand: 8.6 x 7 x 4.7" (22 x 18 x 12 cm)
WeightWith stand: 3.2 kg
Without stand: 2.3 kg
Product:
JVC DT-V9L5U 8.2" Broadcast Studio Monitor
Manufacturer:
JVC
Model:
DT-V9L5D
SKU:
DT-V9L5D
RM Product #:
35688