Product Features
  • 3G/HD/SD-SDI Input and Loop Output
  • HDMI or Composite Output, Selectable
  • Supports Resolutions Up to 1080p60/50
  • Integrated SDI Equaliser and Reclocker
  • Supports 3G-SDI Distances Up to 137m
Our Price $289.00

Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
South Island

The AAS 3G/HD/SD-SDI to HDMI & CVBS Convertor Pro Series converts an SDI signal to HDMI or Composite in real-time, in resolutions up to 1080p60/50. The output type is user selectable, and the HDMI output supports embedded audio. An SDI loop output allows for local or remote monitoring.

An integrated SDI cable equaliser and reclocker maintains the strength of the SDI input signal for the best possible output of the signal. Using a Belden 1694A cable, you can connect a 3G-SDI signal from up to 137m away, an HD-SDI signal from 61m, and an SD-SDI signal from 396m.

Key Features

  • Converts an SDI signal to HDMI or Composite
  • Supports resolutions up to 1080p60/50
  • SDI loop output for local or remote monitoring
  • Integrated SDI cable equaliser and reclocker
  • Supports 3G SDI cable lengths up to 137m, HD SDI up to 61m, and SD SDI up to 396m
Connections1x 3G/HD/SD SDI input
1x 3G/HD/SD SDI loop output
1x HDMI output
1x Composite BNC output
Input Signal3G-SDI (2.97 Gbps), HD-SDI (1.485 Gbps), SD-SDI (270 Mbps)
SDI Formats Supported3G:
1080p @ 50 Hz, 59.94 Hz, 60 Hz

720p @ 23.98 Hz, 24 Hz, 25Hz, 29.97 Hz, 30 Hz
720p @ 50 Hz, 59.94 Hz, 60 Hz
1080i @ 50 Hz, 59.94 Hz, 60 Hz
1080p @ 23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz

252 @ 59.94 Hz, 625i @ 50 Hz

SMPTE 425M (A level and B level), SMPTE424M, SMPTE292M, SMPTE259M-C
SDI Signal Range0.8 V p-p
SDI Impedance75 ohms
SDI Coupling TypeAC coupling
Maximum Cable LengthUsing Belden 1694A cable:

3G-SDI: 137 m
HD-SDI: 61 m
SD-SDI: 396 m

*For best quality and long range, AAS recommends RG6 Belden 1694A Low Loss Serial Digital Coax cables and Contact Plating Gold Plated Pin BNC connectors. RG6 cables have better grounding than RG59 cables and are better for digital signals. Contact Plating Gold Plated Pin connectors provide better conductivity. In installing, do not overcut the braid because that affects the grounding -- the image will have lines and noise.
Frequency Bandwidth165 MHz / up to standard with HDCP, HDMI 1.3
Composite Output FormatCVBS: PAL / NTSC auto detection
Power Supply5 - 24 V DC
Power Consumption6 W (max)
Operating Temperature0 to 40°C
Storage Temperature-20 to 60°C
Relative Humidity20 to 90% RH (non-condensing)
Dimensions15.5 x 12 x 3.5 cm
AAS 3G/HD/SD-SDI to HDMI & CVBS Converter Pro Series
RM Product #: