(no ratings yet) Thanks for your rating!
AJA 3G-AMA 3G-SDI 4-Channel Analog Audio Embedder/Disembedder Mini-ConverterProduct #27583 | SKU 3G-AMA |(no ratings yet) Thanks for your rating!
- Embed XLR Audio in an SDI Signal
- Disembed SDI Audio to Analogue XLR Audio
- Works with AJA MiniConfig Software
- Re-Clocked SDI Output
Embed or disembed up to four channels of SDI audio with the AJA 3G-AMA Mini Convertor. The 3G-AMA includes a breakout cable which can provide up to four channels of XLR analogue audio input or output depending on how the unit is configured. The 3G-AMA can be set up to accept four channels of balanced XLR audio to be embedded in an SDI video feed, or to disembed four channels of digital SDI audio and output them as analogue signals via the four XLR output cables. The output SDI signal is re-clocked to preserve the signal integrity over long cable runs.
Setting the 3G-AMA up is made simple with AJA's free software solution, MiniConfig. The 3G-AMA connects to your computer running MiniConfig with an included USB 2.0 cable enabling your computer to access the unit's internal programming so you can set it up for your specific workflow.
||1 x SDI (BNC):
SD SMPTE 259M
HD SMPTE 292/296M
3G SMPTE 424/425M
||1 x SDI (BNC)
||Video Out is a delayed, reclocked version of Video In, at same frame rate, etc. Video Out is undefined when no input.
SD-SDI - 17.2 µsec
HD-SDI - 6.3 µsec
3G-SDI level A - 3.2 µsec
3G-SDI level B - 6.1 µsec
||1 x DB-25 for 4 channels I/O
DB-25 Breakout cable:
4 x XLR female input breakout connectors
4 x XLR male output breakout connectors
||SMPTE 272M (SD): 20-bit, 48 kHz synchronous
SMPTE 299M (3G/HD): 24-bit, 48 kHz synchronous
Incoming embedded audio can be passed, removed, or overridden.
Up to 16 channels supported.
NOTE: 2048x1080p/psf 29.97 and 30 formats support a maximum of 8 channels embedded audio.
||Embed from audio input:
Disembed from video input:
|Audio Level Control
||Settings Configured via MiniConfig Software:
Pro 1: 0 dBfs = +24 dBu
Pro 2: 0 dBfs = +18 dBu
Pro 3: 0 dBfs = +15 dBu
Consumer 1: 0 dBfs = +12 dBu
||External DIP switch
USB port for MiniConfig software application
||5 to 20 VDC, 5 W
||Operating Temperature: 32 to 104°F / 0 to 40°C
Operating Relative Humidity: 10-90% non-condensing
Operating Altitude: <8,000' / <2,500 m
Safe Storage Temperature (Power OFF): -40 to 140°F / -40 to 60°C
||147 x 79 x 25 mm / 5.8 x 3.1 x 1"
In The Box
- Breakout Cable
- Universal Power Supply
- Limited 5-Year Warranty