| Cube 755 HEVC/H.264 HD Encoder |
|
| Video Input |
1 x 3G/HD/SD-SDI BNC (75 Ohms)
1 x HDMI Type A |
| Bonding |
TeraLink |
| Input Resolutions |
1080p 60/59.94/50/30/29.97/25/24/23.98
1080i 60/59.94/50
1080PsF 30/29/25/24/23
576i
480i
720p 60/59.94/50
576p (HDMI input only)
480p (HDMI input only)
NTSC
PAL |
| Video Compression |
H.264: Baseline, Main, and High Profile
H.265: Baseline, Main, and High Profile |
| Supported Video Bit Rates |
250 kbps to 30 Mbps |
| Test Pattern Generator Support |
Supports custom test pattern |
| Format Conversion |
Built-in video scaler and deinterlacer |
| LUT Support |
CDL/1024 1D LUT (supports 10-bit colour)
33x33x33 3D LUT (supports 10-bit colour) |
| Network Protocols |
TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP |
| Supported Video Transport Protocols |
RTMP
RTP, RTSP, RTSP over HTTP
MPEG-TS (requires optional paid licence) |
| Wi-Fi |
2.4/5GHz 802.11 ac/a/b/g/n MiMo
Encryption: 802.1x, 802,11i, WPA2, WPA, and WEP 64/128 TKIP 128bit AES |
| Remote Control |
Teradek Core |
| Audio Compression |
AAC-LC, MPEG Layer 2 |
| Audio Input |
Embedded audio input
Analogue line or mic in, adjustable gain |
| Audio Output |
Headphone output |
| Configuration |
WebUI and OLED display with joystick navigation buttons |
| Storage |
SD card slot |
| USB Interface |
Powered USB 2.0 host port |
| Ethernet |
10/100/1000BASE-T Gigabit |
| Modem Support |
USB 3G/4G modem support (cheque Teradek website for updated list of compatible modems) |
| Mount Type |
1/4"-20 threaded mounting holes allow for horizontal or vertical mounting |
| Power Input |
2-pin connector |
| Power Consumption |
8 W (max) |
| Auxiliary Power Input |
6-28 VDC |
| Dimensions |
12 x 7.6 x 2.8 cm |
| Weight |
329 g |
| Bond USB Cellular Expansion Module |
|
| Interfaces |
Controlled through Cube
4x powered USB 2.0 host port |
| Power Consumption |
Nominal: 0.5 W, up to 5 W per USB device
Power supplied by Cube
Internal Li-ion battery |
| Temperature |
Operating: -10 to 50°C
Storage: -40 to 90°C |
| Humidity |
Operating: 5% to 95% (non-condensing)
Storage: Maximum 90% |
| Construction |
Milled aluminium (chassis), regulation-compliant PCB |
| Dimensions |
24 x 77 x 120 mm |
| Weight |
224 g |
