sE Electronics DM1 Dynamite Microphone Preamp
Features
- For Passive Ribbon or Dynamic Microphone
- Provides 28 dB of Gain
- Class-A Design
- Low Self-Noise
- Requires Phantom Power
Description
The sE Electronics DM1 Dynamite Microphone Preamp is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level through the preamplifier without adding noise or coloration.
With a sophisticated Class-A design and high-grade FETs, the DM1 has a low self noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum. Additionally, the DM1 Dynamite Active Inline Microphone Preamplifier offers a roadworthy, slim, all-metal design, ensuring reliable operation for onstage applications in difficult environments.
Specifications
General | |
In-Line Accessory Type | Pre-Amplifier |
Input / Output Level | Input: Mic LevelOutput: Mic Level |
Number of Channels | 1 |
Gain | +28 dB (1-Kilohm Load) |
Circuit Type | Class-A FET |
Controls | None |
Connectivity | |
I/O | 1 x XLR 3-Pin Female Input1 x XLR 3-Pin Male Output |
Performance | |
Frequency Response | 10 Hz to 120 kHz -0.3 dB |
Impedance | 135 Ohms |
Load Impedance | 1 Kilohms (Minimum) |
Max Output Level | +8.3 dBV (0.5% THD) |
Noise | Output Noise:30 dBm (JIS-A) |
Power | |
Operating Voltage | 48 V (Phantom Power) |
Operating Current Consumption | 3.0 mA |
Physical | |
Dimensions | 0.75 x 3.76" / 1.91 x 9.55 cm |
Weight | 2.8 oz / 79.9 g |
In The Box
- sE Electronics DM1 Dynamite Microphone Preamp
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: sE Electronics DM1 Dynamite Microphone Preamp
- Manufacturer: SE Electronics
- Model: SE_DM1 MICPRE
- SKU: SE_DM1 MICPRE
- RM Product #: 87854