Inline Problem Solvers

Cloud Microphones Cloudlifter CL-1 Mic Activator

  • 1x Mic Input
  • Improves Signal-to-Noise Ratio
  • Use with Passive Dynamic & Ribbon Mics
  • +25 dB of Clean, Transparent Gain
  • Requires Only Phantom Power to Operate
In stock Ships Monday

Audio Technica AT8538 In-Line Power Module

Power module for electret microphones.
In stock with supplier Usually ships in 2 - 3 days

Art S8 Balanced 2-Way Mic Splitter

8 Channel Balanced 2-Way Microphone Splitter
Usually ships in 6 - 9 days

Audio Technica AT8684 Inline Mic Attenuator (Unimute)

  • Prevents overload of sensitive input stages
  • Provides -10dB, -20dB or -30dB attenuation
  • Durable steel case
  • For use with balanced Lo-Z microphones
In stock with supplier Usually ships in 2 - 3 days

Audio Technica AT8531 In-Line Powering Module

  • TB3-Male (3-pin) Input
  • Standard XLR Output
  • Body-pack power supply
  • Supplies 9-52V phantom power
In stock with supplier Usually ships in 2 - 3 days

Behringer ULTRALINK MS8000 8-Channel Microphone Splitter

8x Inputs, Can be Linked into 4x Inputs, Phantom Power
Usually ships in 2 - 3 days

Switchcraft 318 AudioStix Stereo 1/8" to Mono XLR Male Adapter

  • Stereo 1/8" to Mono XLR M
  • Volume Control
  • Ground Level Switch
Usually ships in 6 - 9 days

Shure A15HP High Pass Filter

  • Provides low-end roll-off
  • Reduces unwanted low-end rumble
  • Slender, in-line XLR (F) to XLR (M) configuration
  • Requires use of balanced signals
In stock Ships Monday

Shure A15LA Line Adapter

  • Provides 50dB of attenuation
  • XLR input and output
  • Full magnetic shield
  • Balanced line-level source
Usually ships in 2 - 3 weeks

Audio Technica AT8801 Mic Phantom Power Module Inline 48V

  • Provides phantom power
  • Convenient in-line design
  • Internally protected
  • 10 Hz - 25 kHz Frequency Response
In stock with supplier Usually ships in 2 - 3 days

Rolls MB15b Promatch 2-Way Stereo Converter

  • XLR and RCA Connectors
  • 3.5 mm Input
  • Line Level Control
  • Use for Various Video Duplication & Audio Recording Studio Applications
Usually ships in 6 - 9 days

Art Phantom II Pro

48V Dual Channel Phantom Power Supply
Usually ships in 6 - 9 days

Rolls HMB115 2-Channel Stereo Analog Audio Balanced to/from Unbalanced Signal Converter

  • Stereo Direct Box
  • Stereo RCA to stereo XLR
  • Stereo Level Control for each Channel
  • Works as Stereo Balanced Line Level Control
  • 1/8” Headphone Level to Line Level Adaptor
Usually ships in 6 - 9 days

Sennheiser MZF8000 Filter Module

  • Designed for MKH 8000 Series RF Microphones
  • Preserves acoustic detail
  • Blocks interference noise
  • Balanced output
Usually ships in 5 - 7 days

Shure Switchable Attentuator

Use the A15AS with Any Low-Impedance Microphone
Usually ships in 2 - 3 weeks

Pro Co Sound GLX In-Line Barrel Ground Lift - XLR Connectors

Available to order today
In stock with supplier Usually ships in 1 - 2 days

Shure A95UF Line Matching Transformer

  • Permits use of very long microphone cables
  • Prevents high-frequency loss
  • Three-socket professional audio connector
Usually ships in 2 - 3 weeks

Art Phantom I

48V Phantom Power Supply
Usually ships in 6 - 9 days

Sennheiser MAS 133 Inline Logic Box with XLR Mic In and Out with Switch

  • Powers the MAS 1 Mic Button
  • Simple Microphone Activation
  • Switchable Microphone Modes
  • TTL Logic Out for Media/Camera Control
  • Mounting Hardware is Included
Usually ships in 5 - 7 days

Switchcraft DMX Barrel Adapter 3 Pin Female To 5 Pin Male

  • 3-pin female
  • 5-pin male
  • Premium quality
  • Problem-solving adapter
Usually ships in 6 - 9 days

Shure A95U Line Matching Transformer

  • 24 dB voltage gain
  • 3-pin XLR male low-impedance connector
  • Amphenol MC1M-type output connector
  • Female phone jack
  • Prevent high-frequency loss
Usually ships in 2 - 3 weeks

Shure A15TG Tone Generator

A15TG Can Operate Continuously for Approximately 1000 Hours
Usually ships in 2 - 3 weeks

Rolls DB226 Stereo Line to Balanced Mono Converter

  • RCA Input or Output
  • Balanced Pluggable Screw Terminal
  • Small Compact Design
  • 40 Hz to 20 kHz Frequency Response
Usually ships in 6 - 9 days

Rolls ILC19 In-Line Level Control

  • For Mic- or Line-Level Balanced Signals
  • Level Control for Balanced XLR Signals
  • Balanced XLR Input and Output
  • Small Compact Size
Usually ships in 6 - 9 days

Shure A89U Adapter for VP89 Shotgun Microphones

Shortens the Length of the VP89 Mics, Fits All Three VP89 Sizes
Usually ships in 2 - 3 weeks