AKG PZM10LL Crown Low-profile Pressure Zone Mic
Features
- Electret Condenser Capsule
- Hemispherical Polar Pattern
- 80 Hz to 20 kHz Frequency Response
- Balanced Line-Level Output
- Unterminated Pigtail
Description
The white AKG PZM10 LL is a hemispherical flush-mount boundary layer microphone designed for security, surveillance, and concealed operation. The inconspicuous low-profile design features a tubular steel housing that mounts in a 25/32" diameter hole, making it ideal for installation in a ceiling panel, wall, or table.
The electret condenser capsule offers a hemispherical polar pattern and a wide frequency response of 80 Hz to 20 kHz. It outputs a balanced line-level signal to an unterminated pigtail lead and is powered via 12 to 24 VDC phantom power.
Key Features:
Inconspicuous Design
The inconspicuous design features a miniature, concealed profile for surveillance and hidden operation.
Optimised Frequency Response
The PZM10 LL features an optimized frequency response, ideal for capturing vocals while minimizing low-frequency ambient noise.
Line-Level Output
This model features a balanced line-level output with an unterminated pigtail output. The PZM10 LL is powered via 12 to 24 VDC phantom power.
Convenient Mounting
The tubular steel housing mounts in a 25/32" diameter hole in a ceiling panel, wall, or table.
Specifications
Microphone | |
Form Factor | Boundary/Surface-Mount |
Capsule | Electret Condenser |
Polar Pattern | Hemispherical/Half-Omnidirectional |
Pad | None |
High-Pass Filter | None |
Performance | |
Frequency Range | 80 Hz to 20 kHz |
Maximum SPL | 120 dB SPL (3% THD) |
Impedance | 240 Ohms (Balanced) |
Load Impedance | 1000 Ohms (Minimum, Recommended) |
Sensitivity | 2.5 mV/Pa (Open Circuit Voltage) -52 dBV/Pa (Open Circuit Voltage) |
Signal-to-Noise Ratio | 68 dB (at 1 Pa/94 dB SPL) |
Equivalent Noise Level | 26 dB SPL A-Weighted (Typical) |
Connectivity | |
Output Connectors | 1 x Pigtail |
Power | |
Operating Voltage | 12 to 24 V (Phantom Power) |
Operating Current Consumption | 400 µA |
Physical | |
Colour | White |
Construction Material | Steel |
Dimensions | ø: 1.3 x L: 2.8" / ø: 3.2 x L: 7.2 cm |
Weight | 2.6 oz / 73.6 g |
In The Box
- AKG PZM10 LL Hemispherical Flush-Mount Boundary Layer Microphone with Line-Level Output (White)
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: AKG PZM10LL Crown Low-profile Pressure Zone Mic
- Manufacturer: AKG
- Model: PZM10LL
- SKU: PZM10LL
- RM Product #: 65010