The Azden FMX-42a is a portable 4-channel audio mixer designed for professional and semi-professional field audio capturing. The FMX-42a features 4 balanced 3-pin XLR microphone inputs with individually switched +48VDC phantom power. A pair of balanced XLR outputs provide line or mic level (switchable) signal to cameras, recorders, etc. Additional features include a switchable input limiter to reduce the possibility of overload distortion, Left/Center/Right pan switches on all input channels and enhanced circuitry for improved signal-to-noise ratio. A 10-pin camera return is also provided. Overall, the Azden FMX-42a proves to be an affordable field mixing solution for event videos, ENG/EFP applications, documentaries, and more.
Key Features
Balanced Mic Inputs
- The FMX-42a features 4 XLR microphone inputs. The balanced inputs deliver high gain and low noise floor
VU Meters
- Dual analog meters provide a comprehensive read on audio level
Balanced Line or Mic Level Outputs
- Dual balanced line or mic level switchable outputs via XLR male connectors provide balanced audio signal to inputs on cameras and additional mixers
2-Channel Addressable Outputs
- Incoming signal from either channel can be assigned to either left or right outputs if signal isolation is desired
Input Limiters
- Both inputs feature high quality switchable limiters. The limiters protect against peak distortion due to overload
Camera Return
- A 10-pin camera return is provided for video applications
Specifications
| Inputs |
4 x Balanced XLR Female |
| Output |
2 x Balanced XLR Male 1 x 1/4" Phone 1 x 3.5mm Mini 1 x 10-Pin Camera Return |
| Monitor/Headphone Out |
1/4" Phone 3.5mm Mini |
| ALT I/O |
No |
| Link Input/Output |
No |
| Impedance |
Line: 20 kOhms Mic: 2 kOhms |
| Gain |
Standard: +4dBu (> 10 kOhm Load) -2dBu (600 Ohm Load) Maximum: +20dBu (>10 kOhm Load) +13dBu (600 Ohm Load) |
| Hum & Noise |
Balanced Output: -120dBu (A weighted, Input Equivalent Level) |
| Frequency Response |
20Hz - 30kHz (±1.5dB) |
| Distortion |
< 0.005% @ 1 kHz (@ LINE Position +19dBu Output) |
| Metering |
Standard Level: 0 VU (+4dBu) |
| Control Voltage Out |
No |
| Phantom Power |
+48V (±4V) |
| Operating Temperature |
Not Specified by Manufacturer |
| Power |
Battery Requirement: 6 Alkaline "AA" Battery Runtime: Approx 10 Hours (Meter Illumination & Phantom Power OFF) External Power: 12VDC @ 200mA Current Drain: 155mA (Meter Illumination & Phantom Power OFF @ 9V) 195mA (Meter Illumination OFF/Phantom Power ON w/2-SGM-1000 @ 9V) |
| Base Dimensions (WxHxD) |
8.6 x 1.9 x 5.9" (220 x 56 x 150mm) |
| Weight |
6 lbs (2.72kg) |
