The Benro BV10 Twin Leg Aluminium Tripod Kit is a complete tripod system ideal for studio applications and handling larger, fully rigged cameras weighing up to 10kg. The kit pairs the 100mm-ball BV10 video head with a twin leg aluminium tripod. The BV10 head features a 5-step counterbalance system to dial in the correct amount for your set-up, and independent 4-step pan and tilt drag settings for precise control over camera movements. A Manfrotto 501/504PL compatible sliding quick-release plate is provided. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. For added versatility, the 100mm-ball tiedown stud is removable to convert the head to a flat base for use on a slider or other support device.
The 2-stage, 3-section twin leg aluminium tripod incorporates a 100mm bowl and offers sturdy support for the BV10 head. It features oversized quick positive leg locks for simple and fast setup, an adjustable/removable mid-level spreader, and dual spike feet with removable rubber pads. The tripod system extends to a maximum height of 163.5 cm, while getting as low as 73.6 cm. A carry case and shoulder strap are included.
Key Features
Head
- Supports up to 10kg
- Removable tiedown stud to convert to flat base head
- 5-step (0 to 4) counterbalance
- Independent 4-step (0 to 3) pan and tilt drag
- -65° to +90° tilt range
- Manfrotto 501/504PL compatible sliding plate
- Two 3/8"-16 accessory threads for mounting accessories, such as monitor or recorder
- Bubble level
Legs
- Twin leg aluminium tripod with 100mm bowl fitting
- 73.6 to 163.5 cm height range (with head attached)
- Oversized twist lever leg locks
- Adjustable/removable mid-level spreader
- Dual spiked feet with removable robber pads
Specifications
| Load Capacity |
10 kg |
| Head Mount |
100 mm bowl |
| Counterbalance |
5-step (0 to 4) |
| Pan Drag |
4-step (0 to 3) fluid cartridge |
| Tilt Drag |
4-step (0 to 3) fluid cartridge |
| Panning Range |
360° |
| Tilt Range |
-65° to +90° |
| Quick Release Plate |
QR13 (Manfrotto 501/504PL compatible) 1/4"-20 and 3/8"-16 cameras screws |
| Accessory Mounting Threads |
2 x 3/8"-16 |
| Material |
Aluminium |
| Stages |
2 |
| Sections |
3 |
| Minimum Height |
73.6 cm |
| Maximum Height |
163.5 cm, at 24° leg angle with column extended |
| Folded Length |
88 cm |
| Weight |
7.3 kg |
