The Cameo PixBar 600 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 12 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,600 Hz.
In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.
The fully RDM-enabled PixBar 600 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 7 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.
The aluminium housing of the Cameo PixBar 600 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.
- 12 ultra-bright 12 W RGBWA+UV LEDs
- Single Pixel Control for effective Chase effects
- Silent operation thanks to convection cooling
- Professional 3- and 5-pin DMX sockets and Neutrik powerCon mains connector
- Fully RDM-enabled
- 7 DMX modes plus operation as a standalone, master or slave
- Diffusing lens for uniform, glare-free light
- 4 adjustable dimmer curves
- Colour temperature correction
- 3 preset shades of white: warm white, cool white, white
- Sturdy aluminium housing
|Product type:||Light bar|
|Number of LEDs:||12|
|LED type:||12 W|
|Dispersion:||With frost filter 600lx (single LED) 41°, without frost filter 1120lx (single LED) 23°|
|DMX input:||XLR 5-pin male, XLR 3-pin male|
|DMX output:||XLR 3-pin female, XLR 5-pin female|
|DMX mode:||12-channel, 74-channel, 6-channel 2, 78-channel, 8-channel, 6-channel 1, 2-channel|
|DMX Functions:||Dimmer, colour macro, strobe, Colour temperature correction, sound programs, Single Pixel Control, Auto programs|
|Standalone modes:||Static colour, strobe, auto programs, sound programs|
|Controls:||Value Down, mode, Value Up, Enter|
|Operating voltage:||110 V AC - 240 V AC / 50 – 60 Hz|
|Power connector:||Neutrik PowerCon|
|Housing material:||Die-cast aluminium|
Dimensions without mounting bracket
|Mounting bracket (incl. rubber feet):||495 x 140 x 100mm|