Cinegears 6-406 Ghost-Eye 400ME Wireless HD & SDI Video Receiver with Data Encryption

Description

The Cinegears 6-406 Ghost-Eye 400ME Wireless HD & SDI Video Receiver with Data Encryption has all the functions of the Ghost Eye 400m, but with added security encryption. Broadcast and transmit privately, confidentially, and protected between your transmitter and receiver. The encrypted message is not compressed or compromised in any way. It has the 4 channel adaptability of previous models, but with the added benefit of complete encryption of data.

With the Cinegears Ghost-Eye Wireless HDMI & SDI Transmitter 400ME, transmit high fidelity, uncompressed HD video transmission 400-1000 meters and feel free as you shoot indoors or out, night or day. With both 3G and HDMI inputs and outputs, using frequencies between 5.1-5.9GHz as needed (up to 4 simultaneously), you will utilize the current cutting edge of video transmission, adding a professional quality to your project.

The Ghost-Eye Wireless Video Transmitter 400M is required for full feature utilisation.

Features

• Uses licence-free 5 GHz ISM frequency band, maximum four frequency channels with automatic or manual selection, coexists with Wi-Fi
• Supports wireless 10-bit HD video with no compression and no delay from 1,312 to 3,280' (400 to 1,000m).
• Uncompromised picture quality with low latency less than 1 ms
• Supports point-to-point, and point-to-multipoint network topology
• Transmitter supports up to four receivers
• Cross-compatible with Ghost-Eye 100M, 150M, and 300M transmitters and receivers
• Highest resolution 10-bit colour depth 4:2:2, 1080p 60 fps HDMI and 3G/HD/SD-SDI input and output
• Supports HDMI to SDI cross-conversion
• Supported professional audio formats include Dolby True HD, DTS-master, and more
• SDI/HDMI input from digital cinema cameras, HD SDI video cameras, and other digital devices
• AES-128 encryption with air interface HD video data stream
• HDMI 1.4 with EDID support
• Supports timecode and tally for broadcast or live event streaming production
• Built-in ultra-silent intelligent fan prevents heat and moisture damage
• Supports wide-range power voltage input, adapts most kinds of camera batteries with optional V-Mount, Gold mount (Anton Bauer), or 1/4" bolt mount battery plates
• Comes with five external antennas with RPSMA socket
• Supports all input and output ports with ±8 kV ESD protection level (HBM, contact discharge)
• Plug-and-play hardware design without need for software, firmware upgradable via mini USB port
• Professional standard two-pin Lemo power plugs
• Built-in LCD screen displays for device and signal status
• Water and mist-proof, shockproof production case with foam insert for easy transportation (available separately)
• COE, FCC, RoHS certified product, safe to use worldwide