EDIMAX 54-Port Gigabit PoE+ Long Range Web Smart Switch with 6x SFP+ 10G Ports

Description

The EDIMAX 54-Port Gigabit PoE+ Long Range Web Smart Switch with 6x SFP+ 10G Ports comes with a web-based user interface, 48 Gigabit PoE+ ports, and 6 SFP+ ports for 10 Gigabit uplinks. The Gigabit connectivity fully utilises the power of your office networking for demanding tasks, such as data backup, video conferencing, IP surveillance, high volume transaction processing, large file transferring, and more.

The EDIAMX specific long-range mode enables power and data transmission to 200 meters at a speed of 10Mbps guaranteed. Tailored for IP cameras and far away from network device applications. The PoE also features PD alive check, auto-detection and power backfeed protection to efficiently provide power and avoid damaging the connected device at the same time.

With smart features such as SNMP v1/v2/v3, PoE PD Alive Check, DHCP Snooping, QoS, CoS, STP, 802.1Q VLAN, IPv4/IPv6, Port Trunking, IGMP v1/v2/v3 Snooping and Port Mirroring, the EDIMAX Pro GS-5654PLX web smart switch provides a cost-effective, reliable, scalable and secure switch solution for SMB networks.

Intelligent Thermal Controller, Power Saving Implementation

With a dedicated and intelligent microchip for cooling system control, the GS-5654PLX can measure and control fan speeds, also turn on/off each fan for power saving and noise reduction.

Guaranteed 200 Meters, Going the Distance

While general Ethernet switches have a distance restriction of 100 meters, the GS-5654PLX long-range mode provides extended power and data delivery distance to 200 meters (656 ft.) at 10Mbps full-duplex operation on a per-port basis. It's ideal for long-distance applications such as IP cameras, VoIP phones, access points, and PoE-enabled IoT devices at remote locations.

PD Alive Check, Cost-effective PoE Solution

Take advantage of a range of PoE functions that lets the GS-5654PLX switch offer high-speed network connection and power supply to Powered Devices (PDs). It is an effective solution for network environments where power outlets are difficult to access. The installation is as easy as plugging in cables, saving cost and time. Moreover, the PoE Powered Device Alive Check feature monitors the real-time status of connected PDs by ping action (sending alive-checking packets). If a PD fails to respond, the GS-5654PLX PoE+ Switch will reboot the PD, which enhances network reliability and reduces administration workload.

Power Backfeed Protection, Let Safety be Known

The GS-5654PLX supplies up to 30W of electricity per port and has a total power supply of 400W to power any 802.3at or 802.3af compliant PoE/PoE+ device. With built-in PoE detection capability, the GS-5654PLX is able to verify whether the connected device is IEEE802.3at or IEEE802.3af compliant. Moreover, with the power backfeed protection, the GS-5654PLX can avoid damaging the PoE ports.

216Gbps Backplane Bandwidth, Strong Ability to Proceed Data

With 216Gbps backplane bandwidth, the GS-5654PLX has a strong switching capability for sending data to the destination devices at ultra-high speed. It supports a forwarding rate of 160.7Mp ps (64-byte package size), utilising the maximum available bandwidth without delay.

Completed Smart Tools, Intuitive and Powerful

The switch features smart and simple network monitoring tools that allow for improved network efficiency and security.

The web-based interface management features QoS (Quality of Service) bandwidth control for better traffic control, VLAN (Virtual LAN) for enhanced network security and multicast IGMP snooping v1/v2/v3 for streaming applications. For quick and easy setup, the web-based management integrates advanced management and security functions of Access Control List (ACL), CoS, STP, Port Trunking, IGMP v1/v2/v3 Snooping and Port Mirroring.

Key Features:

• 48 Gigabit Ethernet PoE+ ports and 6 SFP+ 10 Gigabit uplink ports
• IEEE 802.3af/at PoE/PoE+ compliant
• Up to 30W per port (total power budget: 400W) for powering PoE-enabled devices
• Power saving and noise reduction by Intelligent Thermal Controller to control speeds of each fan or turn on/off
• Dual-firmware image for robust failover mechanisms
• Guaranteed PoE long distance to 200 meters
• Auto-detection of powered devices (PD) and power consumption levels
• PoE powered devices (PD) alive check to enhance the reliability of the network
• Power backfeed protection to avoid damaging the PoE ports.
• DHCP snooping to protect the integrity of legitimate DHCP server and its operations
• 216 Gbps Backplane bandwidth
• 160.7Mpps (64-byte package size) Forwarding rate
• 32K MAC address table and 12KB Jumbo frame
• Supports SNMP v1/v2/v3, Access Control List (ACL), QoS, 802.1Q VLAN, IPv4/IPv6, Port Trunking, Port Mirroring, IGMP v1/v2/v3 Snooping and etc