The ZXA5-90ZB (Black) from Electro-Voice is a bi-amplified active loudspeaker with 1000W for its 15" LF Transducer and 250W for its ND2 2" Voice Coil. Besides its unparallelled power-to-weight ratio, the ZXA5-90ZB disperses sound at 90x50° for wider coverage or short distances. A selectable 100Hz high pass is available for using this speaker with subwoofers. The high-tech, high-impact polypropylene enclosure, featuring an all-weather, water resistant design, houses a 15" woofer and a 1" Neodymium compression driver with a large 2" voice-coil. The black cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.
Key Features
- Bi-amplified with 1000W for the LF and 250W for the HF
- High output, 133dB SPL capacity
- Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
- 15" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
- 90x50° for wider coverage or short distances
- Rugged, high-tech polypropylene enclosure
- 3 suspension Anchor Plates, 10 M8 insert suspension points
- 100Hz selectable high pass for use with subwoofers
Specifications
| Active or Passive |
Active |
| Frequency Response |
-3dB: 58-18,000Hz -10dB: 50-20,000Hz |
| Power Capacity |
LF:1000W HF: 250W |
| Maximum Sound Pressure Level (SPL) |
133dB |
| Nominal Sensitivity |
Not specified by the manufacturer |
| Impedance |
Not specified by the manufacturer |
| Crossover |
1500Hz |
| Low Frequency Driver |
DVX3150: 15" (300mm) Driver |
| High Frequency Driver |
ND2-16: 1" (25.4mm) exit NeodymiumCompression Driver |
| Enclosure Material |
Polypropylene Structural Foam |
| Input Connections |
XLR and 1/4" TRS Combination |
| Dimensions |
27.26 x 17.57 x 16.16" (692 x 446 x 411mm) |
| Weight |
50.5 lbs (22.9kg) |
