The Electro-Voice Zx5-60 is a 2-way P.A. suspension loudspeaker with a 600-watt continuous power handling capacity and a 60° x 60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 15" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The Zx5-60 cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Aunchor Plate attachment points on the bottom of the speaker.
Key Features
- 2-way 600-watt suspension P.A. speaker for log-throw and cluster applications
- High output, 132dB SPL capacity
- Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
- 15" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
- 60° x 60° coverage angle, for long-throw and cluster applications
- Rugged, high-tech polypropylene enclosure
- 3 suspension Anchor Plates, 10 M8 insert suspension points
Specifications
| Active or Passive |
Passive |
| Frequency Response |
58 Hz - 18 kHz |
| Power Capacity |
600 Watts continuous 2400 Watts peak |
| Maximum Sound Pressure Level (SPL) |
132dB |
| Nominal Sensitivity |
98dB, 1W/1m |
| Impedance |
8 Ohms |
| Crossover |
1.5kHz |
| Low Frequency Driver |
15" driver with forced-air cooling |
| High Frequency Driver |
1" titanium Neodymium compression driver with 2" voice coil |
| Enclosure Material |
Polypropylene structural foam, powder-coated galavanized steel grille |
| Input Connections |
Neutrik Speakon NL4 |
| Dimensions |
27.3 x 17.6 x 16.1" (692 x 446 x 411mm) |
| Weight |
49 lb (22.2 kg) |
