With its sleek, modernised casing and reduced form factor, Elinchrom introduces the powerful, portable ELB 1200 Power Pack (No Battery) . The pack's good looks and convenience features are backed by high performance. Speed is the operative word. The pack can deliver its 1200Ws symmetrically or asymmetrically in 1/10 or 1 stop increments with 8.5 stops of power variability from 7 to 1200Ws. There are three flash modes: Eco, Default, and Fast, and the pack recycles to full power in 1.7 seconds in Fast Mode. Flash duration is an action-stopping 1/8850 second at 33% power with the optional Action Flash Head.
Triggering options include a 3.5mm sync port, but the EL 1200 has a built-in EL Skyport receiver that will allow you to wirelessly fire the unit at distances up to 200 m with the addition of an EL Skyport transmitter.
The EL 1200 runs on your choice of two separately purchased lithium-ion batteries. The standard Air battery will give you 215 full-power flashes and 80 minutes of run time for the LED modelling light. The more powerful HD battery provides 400 full-power flashes and 120 minutes of run time. One of these batteries and a charger are required for use of the ELB 1200.
Features
- 18 x 13 x 28 cm (with optional battery)
- 3.2 kg (without battery)
- Large OLED control display
- Fast recycling times (1.7 seconds in Fast Mode, 3 seconds in Default Mode)
- Strobo, sequence, and delayed flash mode
- USB for firmware updates
