Kessler
Filters
Back to results
SORT BY
ITEMS PER PAGE
Categories
Narrow Results
STOCK
FILTER
PRICE
FILTER RESULTS
Kessler Parallax Panning Adapter 3' CineSlider Version
Add automatic pan & fixed-point shooting to Kessler sliders
In stock
Ships tomorrow
$1,239.00
You Pay:
$200.00
$1,239.00
Kessler Crane Magnalink Motor Clamp
- For Use with Magnalink Mounting Plate
- Attaches Plate to CineDrive Slider Motor
- Screws and Hex Key Included
In stock
Ships tomorrow
$159.00
You Pay:
$15.00
$159.00
Kessler Crane Regulated D-Tap to Barrel Cable
- 12 VDC Nominal Output
- For CineShooter and Second Shooter
In stock
Ships tomorrow
$169.00
You Pay:
$114.00
$169.00
Kessler Adjustable Seat Mount Bracket
This is the Mount Only - For use with the Kessler K-Pod
In stock
Ships tomorrow
$249.00
You Pay:
$25.00
$249.00
Kessler MG1021 Magnalink Rod Adapter
Mount CineDrive® Motor Control Boxes (MCBs) to rods
In stock
Ships tomorrow
$159.00
You Pay:
$15.00
$159.00
Kessler Crane Kwik Stand Camera Mounting Plate
Gear-saving plate compatible with the Kessler Crane Kwik Release system
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$209.00
Kessler Second Shooter PRO - Standard 3 Axis Bundle - Slider Motor, Pan & Tilt Head and Controller
- Smoother bezier-based motion
- Significantly improved extended range WiFi (Over 200 ft.)
- Improved ergonomic design
- Lemo 2-pin Power Connector
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$4,449.00
Kessler K-Pod Tripod System
Revolutionary camera system designed to support camera cranes & Jibs
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$2,149.00
Kessler Crane Kwik Release Receiver V2
- For Kwik Release System
- Arca-Type Compatible
- Drop-In Instant Latching
- Push-Button Drop-Gate Release
- Locking Lever for Securing Plate
- One-Handed Operation
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$369.00
Kessler K-Plate
Featuring solid billet aluminum and stainless steel construction
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$329.00
Kessler Kwik Stand XL
Ultimate gear-saving compatible plate
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$289.00
Kessler CS1017 Crane Flat Mount Adapter
- Attach Two 3/8-16 Flat-Mount Accessories
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$58.95
Kessler elektraDRIVE Motor Mount for CineSlider/Stealth
Mount the elektraDRIVE / CineDrive Motor Pods to CineSlider or Stealth
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$289.00
Kessler Kwik LONG Camera Plate (3/8"-16)
- For Kwik Release System
- Designed for Large Camera Systems
- Length: 6"(15.2 cm)
- Arca-Type Compatible
- Mounts Using One or Two 3/8"-16 Screws
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$119.00
Kessler Pocket Jib Traveler
Kessler's newest and most compact Pocket Jib
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$1,449.00
Kessler Crane Shuttle Dolly Base Kit
- Standard speed rail
- Operate manually
- Optional Keeper system
- Optional drag control
- Extendable foot system
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$3,549.00
Kessler Pocket Jib Pro
The ultimate compact, portable, heavy duty jib
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$4,199.00
Kessler Hercules 2.0 Head
Features the revolutionary Bio-Glide technology
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$1,459.00
Kessler Kwik Stand Mini
Ultimate gear-saving Kwik Release compatible plate
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$169.00
Kessler Crane Kwik Short Camera Plate (3/8"-16)
- For Kwik Release System
- Attaches to Cameras & Accessories
- Length: 8.9 cm/3.5"
- Arca-Type Compatible
- Mounts Using 1/4"-20 or 3/8"-16 Screws
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$94.95
Kessler 100mm Ball Kit
100mm Ball Kit with a 3/8" stud
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$229.00
Kessler MG1005 Kwik Utility Plate
Utility plate for Kessler Kwik mount system
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$169.00
Kessler Light Stand C-Stand Mounting Adapter
Converts the pin of the stand to a 1/4"-20 sized threaded stu
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$59.95
Kessler MG1002 Kwik Release Mini Plate
Featuring solid billet aluminum and stainless steel construction
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$94.95
Kessler 100mm - 75mm Bowl Adapter
Converts 100mm bowl into a 75mm bowl.
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$109.00
Kessler 100mm High Hat
Kessler 100mm High Hat
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$379.00
Kessler KillShock Mini Isolator System
- 20cm suction cup base with a hold rating of 79kg.
- 4x 2.5cm tether points on the bottom plate for ratchet strap tie downs.
- Holes for carabiner safety wire.
- 4x built-in handles.
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$1,899.00
Kessler CineSlider (3' Length) (NO crank handle)
Portable solution to get those quick, smooth short-run dolly movements
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$3,149.00
Kessler All-Terrain Outrigger Feet
Perfect for supporting Kessler sliders in just about any situation
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$679.00
Kessler Crane CineSlider/Stealth Crank Handle
- For Use with CineSlider
- Snap-On Design
- Adjustable Arc Diameter
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$149.00
Kessler Crane Second Shooter Hard Case
- Compact Case for Second Shooter System
- Supports Complete 3-Axis Second Shooter
- Automatic Pressure Purge System
- Overlapping Interlocking Lid
- Supports Standard Size Master Locks
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$569.00
Kessler Kwik Slider Plate
- For Kwik Release System
- Designed for Sliders and Accessories
- Base Dimensions: 7.6 x 7.6 cm
- Arca-Type Compatible
- Multiple 1/4"-20 and 3/8"-16 Threads
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$139.00
Kessler 100mm Ball Relocator
Used to attach your 100mm ball to the end of your rig
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$219.00
Kessler Crane Ground Center Rail Support for Shuttle Dolly
- Can be used with optional Adapter to mount stands
- Use every 1.52 m(5') to support Speed Rail
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$329.00
Kessler TLS 3ft Rail
T-Slot 3ft Rail
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$379.00
Kessler Wheel Skirts (Set of 3)
Pack of three wheel skirts for the standard caster wheels
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$159.00
Kessler Crane CS1120 Kwik Rail Leg System
Available to order from Rubber Monkey Today.
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$2,999.00
Kessler KillShock Inversion Mounting Kit
- Use with KillShock Isolator System.
- Invert Your Gimbal or Camera.
- Various Mounting Adapter Options.
- Multiple 3/8"-16 and 1/4"-20 Threads.
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$1,919.00
Kessler KillShock Heavy Duty Shock Module (Black, set of 8)
- For KillShock Isolator System.
- Set of Eight Pre-Loaded Modules.
- Heavy-Duty Isolation Level.
- Use with Light- and Medium-Duty Modules.
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$979.00
Kessler KillShock Medium Duty Shock Module (Red)
- For KillShock Isolator System.
- Medium-Duty Isolation Level.
- Use with Light- and Heavy-Duty Modules.
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$189.00
Kessler KillShock Light Duty Shock Module (Blue)
- For KillShock Isolator System.
- Light-Duty Isolation Level.
- Use with Medium- and Heavy-Duty Modules.
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$189.00
Kessler Kwik Rail - Precision Threaded Rail -42" (set of 2)
Machined threaded rail that can be configured into variable lengths
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$759.00
Kessler Crane 3/8"-16 to Female Baby Pin / Male Junior Pin Adapter
- Used to mount slider to stands
- Has a 3/8”-16 Stud
- Female receiver to mount to standard Baby Pin
- Can be used as male Junior Pin
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$81.95
Kessler Shuttle Dolly Hard Case
Watertight and crush resistant.
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$2,149.00
Kessler 8" Male/Female 15mm Rod Set
8" Male/Female Rod Set (15mm size)
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$229.00
Kessler Crane Rigid Slider Case- Standard Length (3')
Compatible with the 3' Pocket Dolly and Stealth Slider
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$499.00
Kessler Crane CineSlider Soft Case (Traveler)
- Fits 28.5" CineSlider Traveller
- Cinch Straps
- Sewn-In Carrying Handle
- Shoulder Strap
- Small accessories pocket
In Stock with Supplier
Usually ships in 4 - 6 working days
what does this mean?
You Pay:
$319.00