Kessler
Kessler Kwik Rail - Precision Threaded Rail -42" (set of 2)
Machined threaded rail that can be configured into variable lengths
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$779.00
Kessler Crane 3/8"-16 to Female Baby Pin / Male Junior Pin Adapter
- Used to mount slider to stands
- Has a 3/8”-16 Stud
- Female receiver to mount to standard Baby Pin
- Can be used as male Junior Pin
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$83.95
Kessler Kwik Stand 15mm Rod Adapter
Compact and lightweight adapter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Kessler Shuttle Dolly Hard Case
Watertight and crush resistant.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,199.00
Kessler KillShock Medium Duty Shock Module (Red)
- For KillShock Isolator System.
- Medium-Duty Isolation Level.
- Use with Light- and Heavy-Duty Modules.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
Kessler KillShock Medium Duty Shock Module (Red, set of 8)
- For KillShock Isolator System.
- Set of Eight Pre-Loaded Modules.
- Medium-Duty Isolation Level.
- Use with Light- and Heavy-Duty Modules.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$995.00
Kessler KillShock Heavy Duty Shock Module (Black, set of 8)
- For KillShock Isolator System.
- Set of Eight Pre-Loaded Modules.
- Heavy-Duty Isolation Level.
- Use with Light- and Medium-Duty Modules.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$995.00
Kessler KillShock Light Duty Shock Module (Blue)
- For KillShock Isolator System.
- Light-Duty Isolation Level.
- Use with Medium- and Heavy-Duty Modules.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
Kessler KillShock Inversion Mounting Kit
- Use with KillShock Isolator System.
- Invert Your Gimbal or Camera.
- Various Mounting Adapter Options.
- Multiple 3/8"-16 and 1/4"-20 Threads.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,969.00
Kessler Crane CS1120 Kwik Rail Leg System
Available to order from Rubber Monkey Today.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$3,049.00
Kessler Second Shooter PRO Controller
- Up to 10 keyframes per axis.
- Bluetooth device support with wireless PS4 controller operation.
- Automated, wireless firmware updates for your Second Shooter Pro hardware.
- Accelerometer-based mimic mode.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,799.00
Kessler Second Shooter Pro Pan/Tilt System
- Second Shooter PRO Controller
- Pan & Tilt Head with Mounting Threads
- Repeatable Motion Control
- Up to 10 Keyframes on Each Axis
- iOS/Android App with 61m Wi-Fi Range
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$3,549.00
Kessler Crane CineShooter Pan & Tilt Head
- Motorised Pan & Tilt Head
- 6.8kg Load Capacity, Arca-Type Mount
- Onboard Controls, Joystick, Status LCD
- Wi-Fi & Bluetooth Control Options
- DMC & CineShooter App Control
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$6,949.00
Kessler Crane Traveler Length Stealth Slider with Rigid Case (72.4cm)
- 72.4cm Portable, Belt-Driven Slider
- 48.2cm of Camera Travel / 6.8kg Payload
- Adjustable Drag Control
- Rigid Case with Moulded Foam
- Compatible with Motion Control Systems
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,299.00
Kessler Crane Second Shooter PRO Slider Axis System
- Second Shooter PRO Controller
- Slider Motor for Select Kessler Sliders
- Repeatable Motion Control
- Up to 10 Keyframes
- iOS/Android App with 200' Wi-Fi Range
- Sony PS4 Controller Support
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,599.00
Kessler Crane Spiked Feet for Kwik Rail Foot Adapters (Set of 4)
- Set of Four Spiked Feet
- Fits Kwik Rail Foot Adapters
- Threaded End Screws into Adapter
- Grips on Uneven Surfaces
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Kessler Crane MG1084 KillShock ATP (All-Terrain Plate)
- CNC-Machined Aluminium
- 120 x Mounting Holes
- For RadPower Bikes
- Mounting Hole Identification
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$759.00
Kessler Crane Battery Plate for CineShooter Pan & Tilt Head (V-Mount)
- Single V-Mount Battery Plate
- Designed to Power CineShooter
- Mounts with Magnet and 4 x Screws
- Connects to RC-Type Cable on Head
- Low-Profile Design
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Kessler Crane KillShock Mini Shock Module Fine-Tuning Kit
- 4 x Medium-Duty Cables
- 4 x Light-Duty Cables
- 16 x Set Screws
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$77.95
Kessler Crane Motor Kit for Dana Dolly (Belt is required)
Available to Order From Rubber Monkey Today
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,799.00
Kessler Crane 15mm Motor Offset "Dogbone" Bracket
Available to Order From Rubber Monkey Today
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
Kessler Crane Mitchell Boss and Castle Nut
Available to Order From Rubber Monkey Today
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$549.00
Kessler Crane Regulated D-Tap to 2-Pin LEMO Cable
- 12 VDC Nominal Output
- For CineShooter and Second Shooter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
Kessler Crane High Speed / Ultra Quiet Slide Motor
Available to Order from Rubber Monkey Today
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,159.00
Kessler Multi-Angle Mounting Plate
Configures your camera at just about any angle you desire
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$289.00
Kessler Crane Magnalink Mounting Plate
- For CineDrive Motion Control Box
- Magnalink Magnetic Mounting System
- Two Straps for CineDrive Slider Motor
- 1/4"-20 Mounting Holes
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$209.00
Kessler Parallax Panning Adapter 3' CineSlider Version
Add automatic pan & fixed-point shooting to Kessler sliders
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,499.00
Kessler Crane Bridge Cable for Second Shooter System (6m)
- 6m Cable
- For Second Shooter System
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
Kessler Adjustable Seat Mount Bracket
This is the Mount Only - For use with the Kessler K-Pod
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$309.00
Kessler Crane KC-Lite 8.0 Camera Crane
- Single Support Rail Design
- Aluminium Jib Arm Construction
- 4.5 kg Load Capacity
- 1.7 m Fulcrum to Camera Platform Distance
- Mounts Onto Your Tripod Release Plate
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,339.00
Kessler Outrigger Feet
Sturdy adjustable foot system for Kessler Sliders and Dollies
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$439.00
Kessler Second Shooter Pan & Tilt Head
Add-on for Second Shooter 1-axis systems etc.
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$2,199.00
Kessler Second Shooter Slider Motor
- Pulley System Motor for Kessler Sliders
- Supports Stealth/Philip Bloom/CineSlider
- Eliminates Need for Additional Motors
- Fast, Normal, and Slow Motor Speeds
- Includes Small Size Extra Pulley
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,119.00
Kessler Crane Shuttle Dolly Keeper/Grabber Wheels with Brake
- Used for incline/decline shooting
- Secures Shuttle Dolly to speed rail
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$859.00
Kessler Crane Second Shooter Pan Axis
- 23 kg Payload On Centre
- 25°/Sec with 4.5 kg Load
- Operating Temperature -20 to 50°C
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,359.00
Kessler Crane Bridge Cable Pack for Second Shooter
- Use to link 2+ controllers to each other
- Enables more than 3 axes of control
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$119.00
Kessler Crane F.I.Z. Adapter Cable for Second Shooter
- Connect CineDrive F.I.Z. motor to Second Shooter controller
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$179.00
Kessler Crane HD Angle Plate with Swivel
- 360° Pan Swivel
- One-handed lock
- Locking levers
- Load capacity of up to 22.7 kgs
- Tilt Range from 0-95°
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$1,139.00
Kessler Crane Second Shooter High Torque 500 Series Motor
- Works with camera rigs up to 23 kg
- Recommended for inclined and/or vertical slider moves
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$989.00
Kessler N3+ Camera Cable
For use with Canon EOS 7D/5D Series/1D Series/50D/40D/20D/20/10D
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$70.95
Kessler Camera Platform Extender for Pocket Jib Traveler
Easily mount larger bodied cameras to the Pocekt Jib Traveler
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$99.95
Kessler Second Shooter Turntable Conversion Kit
- Converts Second Shooter into Turntable
- Attaches to Pan Axis Quickly and Easily
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kessler SS1006 Second Shooter Magnalink Pan Mount
- Mount Second Shooter Control to Pan-Axis
- Uses Magnalink System for Secure Mount
- Digital-encoded motors
- Quick setup and operation
- 100% repeatable motion control
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kessler Crane CineShooter Roll Axis
- Adds Roll Axis to CineShooter Head
- Supports Loads up to 15 lb
- Maximum Camera Width: 8.4"
- Scaled Markings on Camera Platform
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$2,799.00
Kessler KC-Lite Soft Crane Case
KC-Lite Soft Case for the KC-Lite 8.0 Camera Crane
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$239.00
You Pay:
$839.00
Kessler V3 Mounting Plate
A heavy duty mounting plate compatible with Kessler Cranes
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$239.00
Kessler Crane K-Pod 7" Idler Arm Upgrade for Dolly Trucks
Kessler 7" Idler Arm Upgrade
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$289.00
Kessler 6" Standard Wheels
Standard 6" dual-locking caster wheels
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$439.00
Kessler K-Pod Low-Boy Mount & Ball Relocator
Provides a second, adjustable postion to mount a tripod head
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$499.00