The 4GB ValueRAM DDR3 1333 MHz SO-DIMM Memory Module from Kingston is a small-outline DIMM based on eight 512M x 8-bit DDR3-1333 FBGA components. It is a single rank, unbuffered, non-ECC module with a CAS latency of 9. Additional features include eight independent internal banks, programmable CAS latency, and programmable additive latency. SO-DIMMs are typically used in notebooks, but can also be used in certain servers and other small-form-factor computers.
Features
- JEDEC standard 1.5V power supply
- VDDQ = 1.5V (1.425 ~ 1.575V)
- 667 MHz fCK for 1333 Mb/sec per pin
- 8 independent internal banks
- Programmable latencies
- 8-bit pre-fetch
- Burst Length: 8 (interleave without any limit, sequential with starting address "000" only); 4 with tCCD = 4 (does not allow seamless read or write, either on the fly using A12 or MRS)
- Bi-directional differential data strobe
- Internal self-calibration through ZQ pin (RZQ: 240 Ohms ± 1%)
- On-Die termination using ODT pin
- Average Refresh Period: 7.8 µs at lower than TCASE 185°F; 3.9 µs at 185°F < TCASE < 203°F
- Asynchronous reset
Specifications
| Capacity | 4 GB |
| Speed | PC3-10600 (1333 MHz) |
| Memory Type | DDR3 |
| DIMM Type | 204-Pin SO-DIMM |
| Buffered/Registered | No |
| Error Correction (ECC) | Non-ECC |
| Voltage | 1.5 V |
| CAS Latency | CL9 |
| Memory Rank | Single Rank |
