LD Systems Stinger MON101AG2 10" 2-Way Active Stage Monitor
Features
- 10" Low-Frequency Driver.
- 1" High-Frequency Driver.
- 600W of Class A/B Amplification.
- 121 dB Max SPL.
- 75x75° HF Driver Dispersion Angle.
Description
The LD Systems Stinger MON101AG2 10" 2-Way Active Stage Monitor is a compact active monitor with optimal frequency response and a maximum sound-level pressure of 121 dB designed for live sound, theatre, house of worship, and other PA applications.
The 10" Low-Frequency Driver with an integral 1" HF driver have a dispersion angle of 75x75°; it seats at an angle of 35° and provides 600W peak power-driven by a Class AB amplifier. It has a short-circuit protection and a limiter ensuring reliable operation.
The cabinet is made of half-inch-thick plywood with ergonomically shaped insert handles on both sides of the monitor making it easier to transport to different events or move around a venue.
Key Features:
Balanced Combo XLR-1/4" Jack Input
The XLR input socket is used to connect to a mixing board or another signal source.
Direct Out: Balanced XLR Output
Used to loop through the signal from the line input.
Main Level
Volume control for the powered stage monitor.
Power LED
Lights up when the monitor is switched on and connected to the power mains.
Signal LED
Lights up when an audio signal is present at the line input.
Limit LED
Lights up if the monitor is operating in the clipping range. Brief flashing is not a cause for concern, since the internal audio limiter compensates for over-modulation. Permanent illumination should be avoided by reducing the input level.
Specifications
PA Speaker | |
Configuration | Active 2-Way |
Enclosure Type | Bass-Reflex Floor Monitor |
Total Power Capacity | HF / LF: 600 W Peak |
Amplifier Class | HF/LF: Class-AB |
System Impedance | 10,000 Ohms |
Drivers | |
HF Driver | 1 x 1" / 25.4 mm Tweeter |
HF Voice Coil | 1" / 25.4 mm |
LF Driver | 1 x 10" / 254 mm Woofer |
Performance | |
Frequency Range | 90 Hz to 20 kHz |
Maximum SPL | 121 dB SPL |
Coverage Angle | 75° H x 75° V |
I/O Impedance | Line Input: 10 Kilohms |
Protections | Output Limiter, Overcurrent, Short Circuit |
Connectivity | |
Audio I/O | 1 x Combo XLR-1/4" 3-Pin Female Line Input 1 x XLR 3-Pin Male Line Output |
Signal Processing | |
Crossover | 3300 Hz (Active) |
Dynamic Processing | Limiter |
Power | |
AC Input Power | 110 to 120 VAC, 50 / 60 Hz |
AC Power Connector | 1 x IEC |
Physical | |
Mounting | None |
Monitor Angle | 35° |
Handles | 2 x Side |
Construction Material | Plywood |
Dimensions | to 1513.2 x 18.3" / to 335 x 466 mm |
Weight | 33.7 lb / 15.3 kg |
In The Box
- LD Systems Stinger MON101AG2 10" 2-Way Active Stage Monitor.
- IEC Power Cable.
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: LD Systems Stinger MON101AG2 10" 2-Way Active Stage Monitor
- Manufacturer: LD Systems
- Model: MON101AG2
- SKU: LDS-MON101AG2
- RM Product #: 70667