Lenkeng HDMI 2.0 Extender over Cat6/6a has been discontinued, here are some related products you might like:
This Lenkeng HDMI 2.0 Extender over Cat6/6a includes a transmitter unit and a receiver unit, allows HDMI signal to be transmitted up to 70 metres at 4K resolution using a CAT6/6A/7 network cable. It is perfect for outdoor advertising, video clips, monitor system, home entertainment, and conference, etc
NOTE: ARC feature does not send audio from RX back to TX unit.
| Part No. | LKV676E | |
| Technical | Transmitter | Receiver |
| HDMI compliance | HDMI2.0, compatible HDMI1.4 | |
| HDCP compliance | HDCP2.2, compatible HDCP1.4 | |
| Transmission medium | CAT6/CAT6A/CAT7 | |
| Transmission distance | CAT6/6A/7 Transmission 70 meters | |
| Video bandwidth | 18Gbps | |
| Video support | 480i@60Hz, 480p@60Hz, 576i@50Hz , 576p@50Hz , 720p@50/60Hz , 1080i@50/60Hz , 1080p@50/60Hz , 3840x2160@24/25/30/50/60Hz , 4096x2160@24/25Hz , 1280x960 , 1280x800 , 1280x768 , 1680x1050 , 1360x768 , 1366x768 , 1600x900 , 1024x768 , 800x600 | |
| Audio support | LPCM/DTS-HD/DTS-Audio/Dolby Digital 5.1CH | |
| HDR10(YUV4:4:4) | support | |
| HDMI Loop-out | support | |
| ARC and S/PDIF out | support | |
| EDID through | support | |
| Bi-directional IR passback | support | |
| Input TMDS signal | 0.7~1.2Vp-p | |
| Input DDC signal | 5Vp-p | |
| Input | HDMI×1， DC2.1×1, 3.5mm jack ×1 （ IR ） | DC2.1×1, RJ45×1, 3.5mm jack ×1（ IR ） |
| Output | HDMI×1, RJ45 ×1, 3.5mm jack ×1（ IR ） | HDMI×1, RJ45×1, Opticalx1, 3.5mm jack ×1（ IR ） |
| HDMI connector | Type A 19 Pins, Female | |
| Network cable standard | CAT6/CAT6A/CAT7, follow IEEE-5688 standard | |
| Mechanical | Transmitter | Receiver |
| Housing | Aluminum alloy material+crystal panel | |
| Dimensions(L×W×H mm) | 106.0(L) x 99.0(W) x 26.2(H)mm | |
| Net weight | 210g | 210g |
| Power supply | 5V/2A | 5V/2A |
| Power consumption | 4W | 4W |
| Operation temperature | -20～ 60 ℃ | |
| Storage temperature | -30～ 70 ℃ | |
| Relative humidity | 0～ 90%(no condensation) |
