This Lenkeng HDMI & IR Extender Kit Over CAT6 with EDID Switch includes a transmitter unit (TX) and a receiver unit (RX), working as a pair. It allows for uncompressed transmission and extension full HD 1080p@60Hz HDMI signal via CAT6/6A/7 network cable, up to 50 meters with zero latency. The EDID switch helps to set an HDMI signal format, which supports PoE to power the receiver (Connect power supply to the Transmitter unit only, each unit will power up, as the Receiver unit is powered by the Transmitter unit through network cable). This HDMI Extender supports IR passback for remote control source device. The LKV372EDID is perfect for AV transmission.
Features
- Include a transmitter unit (TX) and a receiver unit (RX), working as a pair.
- Support resolution is up to full HD 1080p@60Hz.
- Use CAT6/6A/7 for long distance transmission.
- Transmission distance up to 50m via CAT6 cable.
- Uncompressed and zero latency.
- With EDID switch for setting a very needed HDMI signal format
- Support PoE to power the receiver from the transmitter.
- Support IR passback for remote control source device from receiver site easily.
- Plug and play, without installation.
