The MOTU 8M - Thunderbolt and USB Audio Interface With AVB Networking and DSP (24x26, 8 Mic/Line/Instrument) is designed for studio recording, installed sound, and live sound reinforcement applications such as mixing a band in a club or music venue. The 1U 19" rackmountable device features eight balanced combination microphone/line/instrument inputs with individually switchable +48V phantom power and pads, v-limiting circuitry to prevent clipping, 8 analog outs, one front panel stereo headphone output with gain control, 2 x 8-channel ADAT optical, and RCA S/PDIF (with sample rate conversion). Additional I/O can be added to the system through AVB networking.
The audio interface utilizes ESS Sabre32 Ultra converters to provide a dynamic range of 123 dB (A-weighted 20 to 20,000 HZ) on balanced TRS analog outputs, a THD+N rating of -110 dB, and a total system latency of 32 samples (0.66 ms) while recording at up to 24-bit 192 kHz resolution. A front panel backlit 324 x 24 LCD provides detailed metering for all analog and digital I/O as well as provide a GUI for adjusting hardware settings.
Using Thunderbolt connectivity, the audio interface can stream 128 audio channels in and 128 channels out to the interface's physical outputs, the DSP-powered 48 digital routing matrix, or AVB audio network streams. The interface can also use high speed USB 2.0 (3.0 compatible) using class compliant drivers to work with most digital audio workstations.
The 48-channel digital mixer can mix physical inputs on the interface, audio channels from your host computer software, AVB audio network streams, or mixer outputs. It features seven stereo auxiliary busses, three groups, a reverb bus that can serve as an alternate 4th group, a main mix bus, and a separate monitor bus that can function as a solo buss.
The mixer includes 32-bit floating point precision DSP-powered models of three British analog console EQ profiles, a classic compressor module with optional peak/RMS operation, and a model of the legendary Telextronix LA-2A optical leveling amplifier with automatic gain control (AGC) characteristics. Each input channel strip features a high-pass filter, a gate, a four-band parametric EQ, and a compressor.
The device's digital routing matrix allows you to route any source signal such as an analog or digital interface input, computer channel, mixer bus output, or network stream to any destination such as an interface output, host software input, mixer input, or any other device (or computer) on the AVB network. A single input or stereo pair can also be split and sent to multiple destinations.
The first of its kind, this interface features an AVB Ethernet port that adopts the AVB industry networking standard for transporting high-bandwidth, low-latency audio and video over Ethernet. It was developed by the IEEE and enables connection to a second MOTU AVB audio interface (1248, 8M, or 16A) via a CAT-5E or CAT-6 Ethernet cable. The standard is open meaning it is not proprietary and will allow for open interoperability across different devices and brands.
The system can be further expanded through connection to a MOTU AVB Switch (sold separately), for five total devices and the capacity to stream over 512 channels on the network. Sixteen 8-channel network streams may broadcasted while simultaneously listening to sixteen 8-channel network streams. The AVB network provides its own network-wide time base for phase locking all connected devices and also allows one of the connected devices to be assigned as the master clock. An added benefit of the AVB network standard is the automatic device discovery for self-configuration, 100 meter cable runs, as well as the system's Stream Reservation Protocol which provides guaranteed Quality of Service (QoS) and an uninterrupted point-to-point network connection.
The audio interface's on-board DSP, mixing, device settings, and network audio routing can all be controlled through a web application running on a web browser from a laptop, tablet, or smartphone connected by wire or Wi-Fi to your local area network. This allows the interface to be controlled using Mac, Windows, Linux, iOS, and Android devices provided they share the same network. By connecting an Apple Airport or other Wi-Fi router directly to the interface with a standard Ethernet cable, the mixing and DSP controls of the interface can be managed using a smartphone or tablet, without the need for a computer. This is useful for situations such as mixing live sound. A total of up to 12 independent stereo mixes can all be independently controlled by different engineers or musicians via Wi-Fi connected iPhones or iPads.
The device includes a collection of quick setup presets designed for different applications in the studio, on stage, or for installed sound such as a recording interface or network snake. Presets can be customized using the digital routing matrix as well as saved for future recall.
Key Features
Audio Quality
- Provides 123 dB dynamic range and a THD+N of -110 dB (0.0003%) at -1 dBFS, un-weighted, 1 kHz
Universal Connectivity
- Connects to computer with Thunderbolt or high-speed USB 2.0 (compatible with USB 3.0) with class-compliant firmware and industry standard drivers to work with any audio software
On-Board DSP With Mixing And Effects
- Provides flexible 48 input digital mixer modeled after large format mixing consoles with 12 stereo busses and DSP effects including reverb, 4-band EQ, gate, and compression
32-Bit Floating Point Processing
- Provides ample headroom for mixing and effects DSP
Modeled Vintage Effects Processing
- Provides classic reverb, compression modeled after historic LA-2A compressor, and EQ modeled after analog console EQs
System Expansion and Audio Networking
- Allows you to add a 2nd MOTU AVB interface (1248, 8M, or 16A) with a Cat-5e or Cat-6 Ethernet cable and up to five devices using a MOTU AVB Switch (sold separately). Multiple interfaces can be networked together with over 100 meter cable runs to stream audio between devices and computers on the network
Matrix Routing and Splitting
- Provides flexible digital matrix routing and splitting for any analog or digital input, computer channel or network stream to any computer, output, or network devices. A single input can be split to multiple output destinations
256 Channels of Network Audio I/O To Host Computer
- Allows monitoring and recording of up to 128 network audio channels in and 128 network channels out through a Thunderbolt connection to a host computer
Web App Control
- Controls on-board DSP, mixing, device settings, and network audio routing from web app software running in a web browser on a computer, laptop, tablet, or Smartphone connected by a wire or Wi-Fi to your local area network
Standalone Mixing With Wireless Control
- Allows you to connect an Apple Airport or other Wi-Fi router directly to the audio interface with a standard Ethernet cable and control the device's mixing and DSP effects from a smartphone or tablet, without a computer such as in live sound mixing applications
ADAT Digital I/O
- Allows connection of outboard digital processors, digital mixers or other gear, 16 channels at 44.1/48 kHz or 8 channels at 88.2/96 kHz
Comprehensive Metering
- Features large backlit 324 x 24 LCD that allows you to view all signal activity at a glance with detailed metering of analog and digital I/O, as well as access to hardware settings from font panel GUI
Specifications
Sample Rates |
44.1, 48, 88.2, 96, 176.4, 192 kHz |
Analog Inputs |
8x balanced combination microphone, line, instrument inputs Preamp Gain: 0 to +53 dB (digitally controlled Max Level: +17 dBu (V-limit at +7) |
Analog Outputs |
8x 1/4" TRS line out (balanced) Max Level: +20 dBu (digitally adjustable -4 to +20) 1x 1/4" TRS stereo headphone |
Digital I/O |
2 banks (16 ch) of ADAT optical at 1x sample rates 1 bank (8 ch) of SMUX optical at 2x sample rates |
Total I/O Channels |
24 inputs and 26 outputs (50 total) at 1x sample rates 16 inputs and 18 outputs (34 total) at 2x sample rates 8 inputs and 10 outputs (18 total) at 4x sample rates |
Computer I/O |
1x Thunderbolt (compatible with 1 and 2) 1x USB 2.0 audio class compliant (3.0 compatible) |
Sync |
1x word clock in 1x word clock out |
Headphone |
1x 1/4" TRS stereo phone (assignable) |
Phantom Power |
8x individual +48V |
Front Panel |
1x 1/4" TRS headphone output 1x digital rotyary encoder for phone volume 8x digital rotary encoders for mic preamp gain 16 x switches, (8) Pad and (8) 48V Phantom switch 324 x 24 pixel LCD for level meters / menu nav 1 x AC power switch |
Dynamic Range |
Line Output: 123 dB A-weighted Line Input: 112 dB A-weighted Mic Input: 112 dB A-weighted Phones: 102 dB A-weighted |
THD + N |
Line Output: -110 dB Line Input: -102 dB Mic Input: -104 dB Phones: -92 dB |
Maximum Level |
Line Output: +20 dBu Line Input: +17 dBu Mic Input: +24 dBu (with pad) Phones: Max 80 mW |
Gain Trim Range |
Line Output: 24 dB (-4 to +20 dBu) in 1 dB steps Line Input: 53 dB (+2 to +24 dBu) in 1 dB steps Mic Input: 53 dB in 1 dB steps Phones: 128 dB in 1 dB steps |
Mac Requirements |
1 GHz Intel-based Mac or faster 2 GB RAM, 4 GB or more recommended Mac OS X version 10.8 or later Available Thunderbolt or high-speed USB 2.0 port A large hard drive (at least 500 GB for recording) |
Windows Requirements |
*Windows support coming soon 1 GHz Pentium-based PC compatible or faster 2 GB RAM, 4 GB or more recommended Windows 8 or later Available Thunderbolt or high-speed USB 2.0 port A large hard drive (at least 500 GB for recording) |
Remote Control |
Any web client platform: Mac, Windows, Linux, iOS, Android Any web browser: Safari, Firefox, Chrome, Opera, Explorer, etc Web client must be connected to the same network as the MOTU AVB interface by wire or Wi-Fi |
Operating Systems |
For Computer Audio I/O: Mac OS X 10.8 or later; Windows 8 or later For web app control: Mac, Windows, Linux, iOS, Android |
Mac Compatible |
Core Audio Drivers for Mac OS X MOTU Digital Performer Avid Pro Tools (version 9 or later) Apple Logic Pro Apple Logic Express Apple Garage Band Apple SoundTrack Pro Ableton Live Propellerhead Record and Reason Steinberg Cubase Cockos Reaper Native Instruments Kontakt Waves Stand-Alone Apps (and plug-ins via compatible host) |
Windows Compatible |
WAVE and ASIO drivers for Windows 8 MOTU Digital Performer Avid Pro Tools (version 9 or later) Ableton Live Cakewalk Sonar Steinberg Cubase Propellerhead Record and Reason Image Line FL Studio Sony Vegas Pro Sony Sound Forge Sony Acid Cockos Reaper Native Instruments Kontakt Waves stand-alone apps (and plug-ins via compatible host) |
Power |
International 100 to 240 VAC autoswitching supply 50/60 Hz 0.5 A max |
Current Draw |
0.5 A max |
Rackmountable |
1U |
Dimensions |
Not specified by the manufacturer |
Weight |
Not specified by the manufacturer |