Speakers

• 1" Silk Dome Tweeter, 3.5" Kevlar Woofer
• 25W Class AB Amplification per Side
• 80 Hz to 20 kHz Frequency Response
• Rear Bass-Reflex Port
• Integrated 2-Band AEQ

• For Studio Recording, Mixing, Mastering
• Acoustic Tuning Adjustment Controls
• 1" Silk Dome Tweeter for Treble
• 4.5" Kevlar Woofer Cone for Bass
• 25W Class AB Amplification

• 120W Total Output
• 203 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• 2-way bass-reflex bi-amplified nearfield studio monitor
• 5" cone woofer and 1" dome tweeter
• 54Hz - 30kHz frequency response
• 45W LF plus 25W HF bi-amp system for total 70W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs, balanced or unbalanced

• 2x 3/4" Tweeters
• 2x 3" Woofers
• Bluetooth Capability
• 2x RCA Inputs
• 1x 3.5mm Input

• 5" Woven Composite Woofer.
• 1" Ultra-Low-Mass, Silk-Dome HF Driver.
• EBM Waveguide Designed by Hugh Sarvis.
• Large Ported Enclosure for Deeper Bass.
• 80W Class AB Biamplification.

• Compact Speakers for Content Creation.
• For Gaming, Monitoring, and More.
• Bluetooth 5.0 Streaming.
• 3.5" Woven Composite Woofer.
• 1" Silk-Dome Tweeter.

• Patented Image Control Waveguide
• Next-generation JBL transducers
• Patented Slip StreamT low-frequency port
• Dual integrated, custom Class-D amplifiers
• New Boundary EQ settings

• Bi-Amplified Powered Reference Monitor
• Dual 41W Class-D Amplifiers
• Low Frequency Woofer: 5"
• Neodymium Woven-Composite Tweeter: 1"

• 95W Total Output
• 165 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• 10" Composite Low Frequency Driver
• 110 dB Continuous Maximum SPL
• 250 Watts of Class AB Amplification
• Variable 50 to 130 Hz Low Pass Filter
• 1/4" TRS Bypass Footswitch Jack

• Active 2-Way Monitor System with complex Active Crossover design
• The ideal solution for near-field monitoring in any recording or broadcasting facility
• Designed for use in stereo as well as multichannel setups
• Includes DT-AR1 Wireless Monitor Speaker Controller

• Bi-Amplified Powered Reference Monitor
• Dual 41W Class-D Amplifiers
• Low-Frequency Woofer: 5"
• Neodymium Woven-Composite Tweeter: 1"

• 70W Total Output
• 127 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Compact Speakers for Content Creation.
• For Gaming, Monitoring, and More.
• Bluetooth 5.0 Streaming.
• 4.5" Woven Composite Woofer.
• 1" Silk-Dome Tweeter.

• Patented Image Control Waveguide
• Next-generation JBL transducers
• Patented Slip StreamT low-frequency port
• Dual integrated, custom Class-D amplifiers
• New Boundary EQ settings

• EBM Waveguide Designed by Hugh Sarvis.
• 8" Woven Composite Woofer.
• 1.25" Silk-Dome HF Driver.
• Large Ported Enclosure for Deeper Bass.
• 140W Class AB Biamplification.

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• 5-inch Black Kevlar low frequency drivers; 1-inch natural silk dome tweeters 

• New computer-optimised tweeter waveguide for precise imaging 

• High-EQ and Low-EQ controls for dialing in the perfect sound 

• Enhanced rear ports for extended low-frequency response 


• 6.5" Woofer and 1.25" Silk Dome Tweeter.
• 104 dB of Precise Sound in Any Location.
• EBM Waveguide for a Wide Sweet Spot.
• Control Level, HPF, MF Trim, and HF Trim.
• XLR, 1/4" TRS, and RCA Connections.

• 8" Composite Woofer
• 200W Class AB Amplifier
• 50 to 130 Hz Continuously Variable LPF
• Polarity Invert Switch
• Input Gain

• 50 watts of clean, articulate stereo sound
• 4” polypropylene-coated woofer
• .75” ferrofluid-cooled silk-dome tweeter

• 50 watts of clean, articulate stereo sound
• 4” polypropylene-coated woofer
• .75” ferrofluid-cooled silk-dome tweeter

• 50 watts of clean, articulate stereo sound
• 3” polypropylene-coated woofer
• .75” ferrofluid-cooled silk-dome tweeter

• 2 x 3.5" Polypropylene Mid-Woofers.
• 1 x Back-Chamber Silk Dome Tweeter.
• Class-D, Bi-Amped, 100W RMS.
• DSP Tuned Bass Reflex.
• Frequency Response: 40 Hz to 24 kHz.

• Powered 2-Way Monitor
• 8"(20.3 cm) Woofer
• 1"(2.5 cm) Dome Tweeter
• Tweak Settings with Wireless Remote
• Active Crossover

• 5.25"(13.3 cm) Woofer
• 0.75"(1.9 cm) Dome Tweeter
• 35 W/Channel Amplifier
• XLR, 1/4", and RCA Inputs
• Stereo Headphone Jack

• Tri-Amplifier Monitor
• Waveguide for Smooth Off-Axis Response
• 290W Total Continuous Output
• Woofer, Midrange Driver, & Tweeter
• Sealed 3-Way Cabinet Design

• Tri-Amplifier Monitor
• Waveguide for Smooth Off-Axis Response
• 290W Total Continuous Output
• Woofer, Midrange Driver, & Tweeter
• Sealed 3-Way Cabinet Design

• CR3-X 3" Multimedia Monitors
• EM-USB USB Condenser Microphone
• MC-100 Headphones
• Includes Connection Cables & Desk Stand
• 3" Polypropylene Coated Woofer

• 50HZ – 20KHZ Frequency Response
• 0° Phase Response
• 75W + 25W Class-D Amplifiers
• 5” Composite Fibreglass Woofer

• Custom 6.8" 2 Air Motion Transformer tweeter
• Unfolded AMT tweeter diaphragm
• 8" custom-coated, woven Kevlar, low-frequency driver
• Balanced XLR, 1/4" TRS, and unbalanced RCA inputs

• 45Hz – 20kHz Frequency Response
• 0° Phase Response
• 100W + 40W Class-D Amplifiers
• 8” Composite Fiberglass Woofer
• 1” ferrofluid cooled Soft Dome tweeter
• RCF Precision Waveguide

• 130 mm Composite Sandwich Woofer Cone
• 25 mm Titanium Dome Tweeter
• 160 W Peak Analogue AB Amplifier
• Elliptical Modelled Dispersion Waveguide
• Wide Horizontal Dispersion

• 74 to 20,000 Hz Frequency Response
• 3/4" Metal Dome Tweeter for Treble
• 76.2 mm Woofer for Bass
• Bass Tilt Control
• Aluminium Minimum Diffraction Enclosure

• 4" Woofer, ¾" Tweeter
• 50W Bass Amplifier
• 50W Treble Amplifier
• Auto-Switching to Standby Saves Power
• Class-D Amplification

5" Kevlar Woofer, 1" Silk Dome Tweeter, 100W Bi-Amped Power, 52 Hz to 35 kHz Frequency Response, Class A/B Amplifiers, Custom Waveguide

• 165 mm Woofer, 19 mm Tweeter
• 90W Bass Amplifier, 90W Treble Amplifier
• Auto Switching to Standby Saves Power
• Curved Edges Reduce Distortions
• Wide On and Off Axis Response

• 120W Total Output.
• 203 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• 5" Woofer, 3/4" Tweeter
• 50W Bass Amplifier, 50W Treble Amplifier
• Aluminium Minimum Diffraction Enclosure
• Directivity Control Waveguide
• Wide On/Off Axis Response

• 8" Woofer & 1" Horn-Loaded Tweeter
• Coaxial Transducer with Coherence Align
• 200W RMS with Class D Amplification
• 102 dB Max SPL
• 32-bit/96kHz Active Floating-Point DSP