NITECORE EA8 Caveman LED Flashlight has been discontinued, here are some related products you might like:
NITECORE EA8 Caveman LED Flashlight
Overview
Description
Note: Product does not include batteries
The EA8 Caveman LED Flashlight from Nitecore is designed for use as a powerful and easily transportable search-and-rescue or caving light. It has four normal outputs from 2 to 590-lumens that can be used for everything from reading to setting up camp. Its turbo mode floods a wide area with 900-lumens of light. In addition to the five output levels, there is a three-stage strobe mode with an SOS distress signal, an emergency location beacon, and a disorientating strobe. All output functions are controlled by a single, two-stage pushbutton switch on the handle. This intelligent switch enables momentary or constant-on modes, with a last-mode-memory function that automatically goes to the last output selected when it is turned on.
Built for durability and reliability, the Caveman features an aluminium housing with a scratch and corrosion-resistant Type III hard anodised finish. It is o-ring sealed to an IPX8 rating, making it submersible to 6.6'. It is also impact-resistant to 5'. Hardened fins at the back of the head act as a heat sink, helping to cool the light and prevent over-heating. Integrated circuitry allows it to run on either disposable or rechargeable batteries, and has reverse-polarity protection to prevent damage to the light if the batteries are installed incorrectly.
Key Features:
Light Performance
- 900-lumen Turbo mode
- Four normal outputs from 2 to 590 lumens
- Tight centre cone of light with large dimmer peripheral ring
- Deep, smooth aluminium reflector produces smooth beam without holes or hotspots
- Flashing location beacon is highly visible and burns minimal battery charge
- SOS signal automatically cycles through Morse-code sequence
- Strobe-mode causes temporary blindness and disorientation
Switching
- Two-stage pushbutton body switch
- Momentary and constant-on modes
- Intelligent switch with last-mode-memory function
- Partially press to cycle through the regular outputs
- Click the switch down fully to turn it off
- From any of the four normal outputs, half-press and hold for instant turbo mode
- From off, click switch to activate turbo mode
- Full click from off activates the turbo mode
- Double click activates the strobe functions
- In strobe mode, half-press and hold to cycle through strobe options
- Lock-out mode prevents accidental activation during storage or transportation
Construction Details
- Aluminium alloy housing
- Type III hard-anodised finish
- Corrosion and scratch resistant
- Anti-reflective coated, tempered lens
- Submersible to 6.6', impact-resistant to 5'
- Textured grip for sure handling in all conditions
- Stainless steel bezel protects lens and head from hits and drops
- Hardened heat-dissipating fins help prevent over-heating
- Integrated battery level indicator on switch
- Compatible with disposable, and rechargeable batteries
- Reverse polarity protection protects light if batteries are installed incorrectly
Specifications
Illumination Source |
Cree XM-L U2 LED |
Output Range |
* Min: 2 * Low: 50 lumen * Moed: 180 lumen * High: 590 lumen * Turbo: 900 lumen |
Battery / Runtime |
8 x AA disposable or rechargeable batteries : * Min: 800 hr * Low: 60.0 hr * Moed: 14.0 hr * High: 3.75 hr * Turbo: 2.0 hr |
Construction |
Aluminium |
Waterproofing |
IPX8 rated, submersible to 6.6' (2 m) |
Dimensions |
* Head: 2.4" (6.0 cm) * Body: 7.2 x 1.7" (18.3 x 4.2 cm) |
Weight |
10.7 oz (302 g), without battery |
In The Box
- NITECORE EA8 Caveman LED Flashlight
- Holster
- Lanyard
- Spare O-ring
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: NITECORE EA8 Caveman LED Flashlight
- Manufacturer: Nitecore
- Model: EA8
- SKU: EA8
- RM Product #: 24253