Neutrik's Mono 1/4" MIL-Plug (MIL-P-642/4) has a black metal housing and brass contacts and features similar construction as the standard Neutrik phone plugs with chuck type strain relief and a slim-line metal barrel to meet the high requirements for military communication equipment. This plug is not compatible with standard 1/4" jacks (acc. EIA RS453) and patch panels.
Key Features
- 1/4" B-gauge and MIL type plugs
- One-piece tip conductor ensures secure conductivity
- Metal shell and chuck type cable retention, for robust and dependable design
Specifications
| Outer Diameter |
0.15-0.27" (4-7 mm) |
| Lifetime |
> 1000 mating cycles |
| Wire Size |
0.15 in² (1 mm²) |
| Gauge |
18 AWG |
| Wiring |
Solder contacts |
| Dielectric Strength |
1 kV dc |
| Insulation Resistance |
> 2 GΩ (initial) |
| Rated Voltage |
50 V |
| Bushing |
Polyacetal (POM) + PU |
| Contact Plating |
2 µm Brass |
| Contacts |
Brass (CuZn39Pb3) |
| Insert |
Polyamide (PA 6.6 30 % GR) |
| Shell |
Brass (CuZn39Pb3) |
| Shell Plating |
Black metal |
| Strain Relief |
Polyacetal (POM) |
| Standard Compliance |
MIL-P-642/4 |
| Solderability |
Complies with IEC 68-2-20 |
| Temperature |
-4-149°F (-20-65°C) |
| Connector 1 |
Mono 1/4" MIL Male |
| Connector 2 |
Mono 1/4" MIL Female |
