The Neutrik NC6FX-B 6-Pole Female Cable Connector is an industry standard XLR cable connector. It is easy to assemble since it has only 4 parts and no screws. It features a compact design with a sturdy die-cast shell and consists of a fiberglass reinforced hard plastic insert and a chuck-type strain relief for secure clamping of all cables.
Key Features
- Rugged and durable zinc die-cast shell
- Chuck-type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Colored rings and boots (sold separately) available for coding and marking
- UL recognized components
Specifications
| Connection Type |
XLR |
| Gender |
Female |
| Capacitance |
Between Contacts: <7 pF |
| Contact Resistance |
<3 mΩ (inner) |
| Dielectric Strength |
1.5 kVDC |
| Insulation Resistance |
>2 G Ω (initial) |
| Rated Current Per Contact |
7.5 A |
| Rated Voltage |
50 V |
| Insertion Force |
<20 N |
| Withdrawal Force |
<20 N |
| Lifetime |
>1,000 mating cycles |
| Wire Size |
1 mm² maximum 18 AWG maximum |
| Wiring |
Solder contacts |
| Locking Device |
Latch lock |
| Chassis Shape |
D |
| Contact Plating |
0.2 µm Au hard alloy over 2 µm Ni |
| Contacts |
Brass (CuZn39Pb3) |
| Insert |
Polyamide (PA 6.6 30 % GR) |
| Locking Element |
St3K32 (latch) / Ck 67 (spring) |
| Shell |
Zinc die-cast (ZnAl4Cu1) Plating: Black chromium |
| Approvals |
UL |
| Flammability |
UL 94 HB |
| Standard Compliance |
IEC 61076-2-103 |
| Protection Class |
IP 40 |
| Solderability |
Complies with IEC 68-2-20 |
| Temperature Range |
-22 to 176°F (-30 to 80°C) |
| Range |
2.75 x 2.83" (70 to 72 mm) |
| Diameter |
Ø0.74" (Ø19 mm) |
