Upgrade Version - to use this upgrade version of Nikon Camera Control Pro 2.0, which can be purchased at a significant savings over the full version, you will need to have a fully licenced, earlier version of Nikon Camera Control Pro installed on your computer.
Nikon Camera Control Pro 2.0 software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter.
Advanced functions of newer cameras ( e.g. D3, D700, D300, D90 ), such as the Viewer for preview and selection of images prior to transfer, LiveView function and PictureControl System are also supported, along with the workflow of Nikon's exclusive photofinishing software Capture NX (optional) and the browser and viewer software View NX.
Features
Take Control of Your Photography - Remotely
Most settings of Nikon digital-SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer, using Nikon Camera Control Pro 2.0. Wired or wireless LAN is also available when using a remote transmitter.
Save Tone Compensation Curves In-camera
In newer Nikon digital SLRs, including the D2Xs, Nikon Camera Control Pro 2.0 supports the Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and customised Tone Compensation Curve data can be saved to tailor the camera's behaviour to the photographer's vision and improve efficiency when using multiple cameras at the same time.
Viewer Function
Enhanced viewer function enables thumbnail display of images stored in a computer and enables captured images to be viewed within the software. Furthermore, images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency.
Improved Graphic User Interface
Camera Control Pro 2.0 provides a simulated camera LCD panel on the computer screen, performs the same function as the cameras display, and has been modified to be consistent with those used in the latest cameras for smoother operation.
Supports LiveView with D3, D700, D300 & D90 Cameras
Supporting the Liveview Mode (Hand-held mode and Tripod mode) of the D3, D700, D300 and D90 cameras permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod Mode, focal-plane contrast AF on a desired point within a specific area is possible.
Compatible with Nikon's Image Authentication
Image data can be transferred and stored on the computer with Camera Control Pro 2.0 without affecting the Image Authentication function of camera models equipped with this feature.
Smooth Integration with other Nikon software
Camera Control Pro 2.0 provides support for Nikon ViewNX browser and viewer software, and for Capture NX photo-finishing software.
Nikon Camera Compatibility
Camera Control Pro 2.0 is compatible with all Nikon SLR Digital Cameras including the Nikon D3, D700, D300, D2 series ( D2H, D2X, D2Hs, D2Xs,) D1-series (D1, D1H, D1X), D200, D100, D90, D80, D70 series, (D70, D70s), D50, and D40 series (D40X, D40) models.Note on Wireless Support D2X / D2Hs / D2Xs support wireless LAN when used with the WT-2a. (Windows Vista support is currently not available for D2 series): D200 supports wired or wireless LAN when used with the WT-3a, D3 & D300 supports wired or wireless LAN when used with Wireless Transmitter WT-4a.
Specifications
System & Software Requirements | Upgrade Version - to use this upgrade version of Nikon Camera Control Pro 2.0, which can be purchased at a significant savings over the full version, you will need to have a fully licenced, earlier version of Nikon Camera Control Pro installed on your computer.Windows System * 1 GHz or higher Intel Celeron / Pentium 4 / Core Series CPU * Windows 2000 Pro (SP4), XP (Home & Pro w/ SP2), Vista (32-bit) * 256MB RAM or more (512MB for Vista / 768MB or more recommended) * USB (built-in) port or IEEE 1394 (Only OHCI-compliant boards supported) * Monitor with 1,024 x 768 pixels & 24-bit colour (True Colour) or better * CD-ROM drive required for installation * Internet connection may be required * IEEE 1394 connection (D1 series) not supported with Macintosh computers with Intel Processors. Macintosh System * 1 GHz or higher Power PC G4, G5, Intel Core, Xeon series CPUs * Mac OS X (10.3.9 - 10.4.1) * 256MB RAM or more (768MB or more recommended) * 1GB or more Hard Disk Space * USB (built-in) port or IEEE 1394 (Only OHCI-compliant boards supported) * Monitor with 1,024 x 768 pixels & 24-bit colour (True Colour) or better * CD-ROM drive required for installation * Internet connection may be required * IEEE 1394 connection (D1 series) Note: IEEE 1394 connection (D1 series) not supported on Macintosh computers with Intel Processors or with Windows Vista Note: Operation when connected with USB Hub device or IEEE 1394 Hub device is not guaranteed. |
Packaging Info | |
Package Weight | 0.24 lb |
Box Dimensions (LxWxH) | 7.6 x 5.5 x 0.8" |