Oben AC-1451 4-Section Aluminum Tripod with BA-113 Ball Head
- Load Capacity: 13.2 lb
- Max Height: 67.2"
- Min Height: 8.9"
- Folded Length: 23.1"
- Leg Sections: 4
Email me when stock arrives
- Product: #70889
- SKU: AC-1451/BA-113
The Oben AC-1451 4-Section Aluminium Tripod with BA-113 Ball Head provides reliable support for DSLRs, point-and-shoot cameras or video cameras 13.2 lb.
The tripod's four-section legs are fabricated from high tensile strength aluminium. It rises to a maximum height of 67.2" with the centre column fully extended and folds down to a compact 23.1" for transport. Flip locks on the legs facilitate rapid setup and break down. Three leg angles: normal (80°), low (55°) and extra low (24°) are available via angle adjustment tabs at the joint of each leg. You can reverse the column with a twist of the butterfly knob or split it in two and use the short column for macro and low angle shooting as low as 8.9" from the ground. Any combination of leg angles can be combined to accommodate uneven terrain, stairs or obstructions. A built-in bubble level helps you square up your compositions. For extra stability the centre column employs a spring-loaded counterbalance hook.
The included BA-113 ball head features a single-action knob that controls its rotation and 360 degree panning while a robust ball-locking mechanism secures it solidly. The head's four bubble levels ensure accurate panoramas. The BA-113's built-in quick release comes with a camera plate that features a standard 1/4"-20 screw and a retractable, removable video pin to provide additional stability for camcorders. Since the head is removable, locking screws underneath the collar thwart torsion when re-attaching. The tripod comes with a carry case and shoulder strap for storage and transport.
A spring-loaded counterweight hook is located at the bottom of the centre column. The column can be separated into 2 parts to give you a short column for low angle and macro work
Leg cushions on 2 legs provide a firm grip in cold or wet weather
Two included hex keys attach to a tripod leg, so you're always ready to tighten components
Padded carry bag provides a snug fit for the tripod/head combination and features two heavy-duty zippers, an interior pocket with a zipper, and a shoulder strap
Angle adjustment locks keep legs at the chosen angles
Centre column is grooved to prevent rotation
Angled rubber feet for maximum contact with the ground
Tripod features reversible 1/4"-20 and 3/8"-16 screw to fit almost any head
|Head Type||Ball Head|
|Base Mount||1/4"-20 & 3/8"-16 Threads|
|Camera Mounting Screw||1/4"-20 Male|
|Load Capacity||13.2 lb / 6 kg|
|Maximum Working Height||67.2" / 170.7 cm|
|Max Height without Centre Column||55.8" / 141.7 cm|
|Minimum Working Height||8.9" / 22.6 cm|
|Folded Length||23.1" / 68.6 cm|
|Weight||4.1 lb / 1.9 kg|
|Leg Lock Type||Flip Lock|
|Independent Leg Spread||Yes|
|Leg Diameter||1.1" / 28 mm|
|Centre Column Features||Reversible|
|Centre Column Shape||Faceted|
|Centre Column Sections||2|
|Centre Column Extension Type||Rapid|
|Lateral / 90-Degree Centre Column||No|