- Load Capacity: 11 lb
- Maximum Height: 15.5"
- Minimum Height: 4.2"
- Folded Length: 10.4"
- Leg Sections: 3
- Product: #70945
- SKU: CTT-1000
The CTT-1000 Carbon Fibre Tabletop Tripod from Oben is a three-section support with carbon fibre-constructed legs, which have twist leg locks that turn and enable you to extend the legs to a maximum height of 15.5". Even with the legs fully extended, you can remove the ball head and screw on the included three-section extender that adds 12" in height. This extender places a camera at a higher shooting angle for recording an interview or shooting a portrait. To supplement more stability to the 0.98 lb tripod, the legs splay further out to a minimum height of 4.2". Removing the extender, collapsing the legs, and placing the head back onto the legs gives the tripod a folded length of 10.4". Each leg has a rubber foot, which prevents the tripod from sliding on smooth surfaces and the rubber feet are removable, which reveal spikes to stabilise the support on soft terrain.
The dual-action ball head is Arca-type compatible. You can unlock the movement and position your camera at a 90° angle with the cut notch located on the side of the head. The head also rotates 360°, which allows a camera weighing up to 11 lb, to follow a subject freely with ease when the pan lock is unlocked. Additionally, the ball head includes a quick release plate with a 1/4"-20 camera mount.
Three-section carbon fibre legs with twist locks that extend the tripod to a maximum height of 15.5"
Removing the ball head allows you to screw on the included three-section extender that adds 12" of height to the tabletop tripod, and the extender has a 1/4"-20 mounting thread
Splaying the legs out gives the tripod a minimum height of 4.2" and provides a more stable support
The rubber feet prevent the 0.98 lb tripod from sliding on smooth surfaces and are removable, which reveal spikes to stabilise the support on soft terrain
The dual-action ball head has an independent pan lock that enables you to rotate the head 360°, and a ball lock to position a camera at a 90° angle with the cut-notch located on the side of the head
The Arca-type head has a load capacity of 11 lb and includes a quick release plate
|Head Type||Ball Head|
|Base Mount||3/8"-16 Thread & 1/4"-20 with Bushing|
|Camera Mounting Screw||1/4"-20 Male|
|Quick Release Plate Type||Arca-Type|
|Independent Pan Lock||Yes|
|Pan & Tilt Range|
|Vertical Tilt||-40° to +90°|
|Load Capacity||11.02 lb / 5 kg|
|Maximum Working Height||15.5" / 39.4 cm|
|Minimum Working Height||4.2" / 10.7 cm|
|Weight||0.98 lb / 445 g|
|Mounting Screw||1/4"-20 Male|
|Leg Lock Type||Twist Lock|
|Leg Positions||3 Positions|
|Independent Leg Spread||Yes|
|Feet Features||Rubber, Removable, Spiked|
|Centre Column Sections||3|
|Centre Column Extension Type||Rapid|