The Paralinx Tomahawk2 is a long-range HD video system offering real-time wireless HD transmission for your Television, Film, Broadcast, Industrial or UAV/UAS application. The Paralinx Tomahawk2 has a range of up to 2000 feet** (600m) and maintains an incredible <1ms latency glass-to-glass. Both the transmitter and receiver feature 2-Pin power connectors and the transmitter features a wide 6-28V input voltage range (receiver has 7-17V input). The Tomahawk2 system features both 3G-SDI input (with loop-out) & HDMI input on the transmitter, and a 3G-SDI output on the receiver.
The Tomahawk2 features several improvements from the original Tomahawk:
- Dual-Input Transmitter (HD-SDI & HDMI)
- Receiver is lighter and 60% smaller
- Input voltage range is now 6-28V on Transmitter
- Machined-aluminum Receiver enclosure improves durability
- Integrated 1/4-20 & 4-40 mounting points on Tx/Rx
- Compatible with Teradek Sidekick (1stGen)
- Compatible with Teradek Bolt 2000, Sidekick1, or Paralinx Tomahawk (1st Gen)*
- All Transmitter+Receiver sets include custom case
Tomahawk2 Features:
- Lightweight Minimalist design for Handheld, Steadicam, Gimbal, and UAV Payload
- Transmitter features both 3G-SDI & HDMI inputs and SDI loop-out. Receiver features 3G-SDI output.
- Rugged machined-aluminum enclosure for both the transmitter and receiver
- Ultra long-range transmission - Up to 2,000 feet (600 meters) **
- REAL-TIME viewing - Less than 1-millisecond latency
- Visually lossless full-HD video signal allow critically accurate monitoring
- Multicast capable (up to 4 receivers per transmitter)
- 128 bit AES Encryption - Secure transmission
- Operates on 5gHz frequency band
- Conforms to major technical and environmental standards including FCC, CE, MIC (TELEC) and RoHS Specifications
1:1 Deluxe Kits include:
1x Tomahawk2 SDI/HDMI Transmitter
1x Tomahawk2 SDI Receiver
1x Tomahawk2 Mounting Bracket (for transmitter)
1x Paralinx Dual Battery Bracket (for receiver)
1x AC power supply with 2-pin connector
2x PTap to 2-pin power cables (18in/45cm
1x PTap to 2-pin power cable (6.5in/16.5cm)
1x 2-pin to 2-pin Power Cable (24in/60cm)
2x 18in/45cm BNC cables (right-angle to right-angle)
1x 18in/45cm HDMI cable
1x Mini-USB to USB cable (for firmware updates)
1x Paralinx Array MIMO panel antenna
5x Type-N to RP-SMA antenna cables (for use with Array)
2x 5dbi omnidirectional antennas (for transmitter)
5x 2dbi omnidirectional antennas (for receiver)
1x Lightstand adaptor
1x Custom Case with rugged foam (Pelican 1550)
