The black E15 15” Two-Way Passive Loudspeaker from QSC is a trapezoidal, two-way loudspeaker using a 15”, 500W, die cast aluminium frame woofer with a 3.5” voice coil. It is designed for use when high-power and powerfull low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMT waveguide assures that even distant listeners will be well covered.
An all metal, dual-angle, 35mm socket allows the loudspeaker to be mounted vertically on a pole or angled down by 10° to improve audience coverage, and reduce rear wall reflections. Multiple mounting options using E Series Yoke or M8 eyebolts (sold separately) are supported. Input connections include dual NL4 as well as screw terminal receptacles.
Features
- 500W continuous, 2000W peak
- E Series Entertainment System offers advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Constructed of rugged plywood and coated in black, textured paint
- Dual angle pole socket
Specifications
| Configuration | 1 x 15" (38 cm), 2-way, non-powered |
| Frequency Range | 55 Hz to 20 kHz (-6 dB) |
| Power Capacity | 500 W (continuous) / 2000 W (peak) |
| Sensitivity | 97 dB, 1 W @ 3.2' (1.0 m) |
| Coverage Angle | 75° conical |
| Output | 130 dB |
| Drivers | LF: 15" (38 cm) driver with 3.5" (89 mm) voice coil HF: 1.5" (38 mm) exit, 2.8" (71 mm) voice coil, compression driver |
| Nominal Impedance | 8 Ohms |
| Crossover | Full-range only, 1.55 kHz |
| Input Connectors | 2 x NL4 1 x barrier strip |
| Enclosure | Trapezoidal plywood. Two side mounted handles. Perforated, powder-coated steel grille with foam lining. |
| Suspension | 6 x M8 suspension points, dual angle, 35 mm pole-socket |
| Dimensions | 16.5 x 28.2 x 17.5" (42 x 71.6 x 44.5 cm) |
| Weight | 68 lb (31 kg) |
