We are closed Friday 29th March & Monday 1st April for Easter

RCF TT2-A Active High Output 2-Way Speaker has been discontinued, here are some related products you might like:

RCF TT2-A Active High Output 2-Way Speaker

Product #43201 | SKU 13000378 | RCF
This product is no longer available what does this mean?
Not currently for sale
Contact us for more information
This product is no longer available what does this mean?

Overview

Available to order today

Description

The TT2-A Active High Output 2-Way Speaker from RCF is compact, active and designed specifically for high-quality indoor and outdoor near field sound amplification. It is suitable for near field sound reinforcement, live sound, and corporate events.

It is equipped with 1600W digital amplification, of which 1100W are delivered from the low-frequency amplifier and 500W from the high-frequency digital module. The low-frequency transducer is a powerful 12" hypervented neodymium woofer with a 4" voice coil. A 3" titanium dome compression driver loaded to a 90 x 50° dispersion constant-directivity horn provides high-frequency coverage.

With DSP on board of each cabinet, it is possible to address to single cabinets or groups of cabinets specific presets or modifications of parameters like gain, equalisation, or delay. Since the RDNet protocol is based on RS-485 communication protocol, it is stable and it is possible to send and receive data over a simple XLR cable.

The TT2-A features a multifunctional rear encoder to control all the speaker functions (such as gain reduction, delay, speaker presets) even without network connection. The speaker is equipped with a complete set of integrated rigging mechanics for rental or installation.

Features

Amplification

Class D Power

Two independent digital amplifiers, 1100W for low frequency and 500W for the high frequency driver, deliver astonishing output power, making the TT2-A a powerful 2-way module. These class D amplifiers offer hi-fi sound, low distortion with negligible quiescent noise, and stable burst response

Efficiency

The amplification module is housed in a separate chamber and mechanically insulated from the cabinet vibration for reliability in long time operation. Thanks to the efficiency of the amplifiers, no fans are needed for quiet operation of the speaker

Internal Processing

The 32-bit, floating point digital signal processing at 96 kHz takes care of 2-way system crossover and transducer alignments, 8 programmable system equalisation, programmable output time delay, input sensitivity reduction, soft limiter and gentle compressor for high signal inputs, RMS current monitoring and transducers protection, and input noise reduction.

A specially developed algorithm takes care of the frequency-dependant soft limiter, offering to the listener the same linearity of the system from very low level signals to the maximum output of the amplifiers

AC RDNet In-Out Plug

A dedicated processing area is available through the RDNet input board (sold separately). You have many options available on RDNet, including remote monitoring, special custom equalisations, high and low pass, single way solo and mute, and many other options

Rear Panel

The rear panel features a simple rotary encoder to control all speaker functions. A bright 7-segment clear display helps in changing the settings of the system. The only switch on the panel allows you to set to local or remote control. A simple command from RDNet totally disables the input panel to allow you to take exclusive remote control of the speaker

Components

HF Design

The HF transducer is a 3" diaphragm compression driver with a 2" exit throat. The pure titanium moulded diaphragm offers sonic quality, extended to high audible frequencies, which ensures consistent power handling and reliability. The diaphragm and suspension are formed from 0.002" (0.05mm) thick pure titanium. At the point where the titanium suspension is bonded to the assembly ring, a special dampening adhesive has been applied in order to further reduce and eliminate distortion creating resonances

Direct Drive Voice Coil Assembly

The voice coil assembly is designed using a high-strength, high-temperature Kapton voice coil former and a rectangular profile copper clad aluminium wire, and is assembled using specially formulated adhesives. Proprietary curing processes ensure assembly strength and safe operation even under extreme thermal conditions. The top of the former is bent and bonded directly to the edge of the titanium diaphragm, resulting in a Direct Drive configuration. Direct Drive ensures optimal transfer of energy between the voice coil and the dome assembly, providing extended frequency response beyond 10 kHz, reducing break up modes, and lowering distortion. This assembly delivers high power handling along with great mechanical and thermal properties that make the compression driver reliable and robust

Woofer Design

TT2-A's mid bass transducer is designed to provide great frequency response linearity with very low distortion. A neodymium magnetic structure ensures precision and a 4" voice coil design provides high power handling. The dual-forced air venting system ensures efficient voice coil ventilation to minimise the power compression and provide high power handling

Inside/Outside Voice Coil

The speaker uses a voice coil that combines the advantages of inside/outside technology and the quality of polyimide-imide materials (wire resins and formers resins). This inside/outside coil offers many advantages: the dissipation surface and adhesion area to the former is doubled. During thermal expansion, the former is squeezed between inside and outside layers, offering optimum mechanical resistance.

The inside/outside formers are made from polyimide-imide fibreglass and the area between the coil and the cone is a triple layer of Nomex-fibreglass-Nomex for optimum stiffness and accurate sound transfer

Acoustic Design

TT2-A features digital power amplifiers and a group of processing algorithms that, running at 96 kHz, take care of the speaker's linearity and its dynamic control

Cabinet

Water-Resistant Baltic Birch Plywood

The cabinet is made with Baltic Birch plywood with every layer glued with special adhesive that makes the cabinet completely water-resistant even before the painting process

Heavy-Duty Polyurea Paint

Special polyurea paint is used to create a thick, full coating of the cabinet, making it highly resistant to scratches and bumps

Heavily Braced Internal Structure

The internal structure is heavily braced to survive long-term use and transportation and all the parts are assembled on metal inserts with metric screws. On the top and bottom of the cabinet, 2 large metal brackets are integrated for safe rigging day after day

Handles

The cabinet features 2 die-cast aluminium side handles, powder coated and with a rubber handgrip. Thanks to the internal scoop design, it is possible to use the handle in 3 different directions to facilitate transport, positioning, and loading

Rigging

The speaker offers many rigging possibilities: Top M20 insert; pole mount on the bottom; top and bottom fly tracks (6x); side quick lock pins (4x); side M10 rigging points (4x).

Applications

• Portable and installed audio-visual systems • Retail spaces, A/V presentation suites, shopping malls • Theatrical sound reinforcement • Auditoriums, lecture halls, stadia, arenas, and theme parks • Fill/delay applications • Conference centres, ballrooms, and houses of worship • Effects systems • Under-balcony coverage and distributed systems

Specifications

Frequency Response 55 to 20,000 Hz (-3 dB)
Maximum SPL 134 dB
Coverage Angle Horizontal: 90°
Vertical: 50°
Driver Compression: 2" neodymium, 3.0" voice coil
Woofer 12" neodymium, 4.0" voice coil
Input Connectors XLR, RDNet
Output Connectors XLR, RDNet
Input Sensitivity +4 dBu
Crossover Frequencies 750 Hz
Protection Thermal, rms
Limiter Soft limiter, Dynamic
Controls Gain reduction, RDNet local setup/bypass, Time Delay, Presets (Linear, Close, Far listening, High-pass), RDNet Ready
Power Total: 1600 W RMS
Frequencies High: 500 W RMS
Low: 1100 W RMS
Cooling Convection
Connections powerCON In-Out
Material Cabinet: Baltic birch plywood
Hardware Installation/Rental fittings
Handles 2 side
Pole Mount/Cap Yes
Dimensions (H x W x D) 25.3 x 14.6 x 18.5" (643 x 372 x 470 mm)
Weight 75 lb (34 kg)

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: RCF TT2-A Active High Output 2-Way Speaker
  • Manufacturer: RCF
  • Model: TT2-A
  • SKU: 13000378
  • RM Product #: 43201

Recently Viewed

View All