Sachtler FSB 10T Fluid Head with Touch & Go Mechanism
- 4 to 12 kg Pounds Payload Range
- 100mm Half Ball
- +90 to -70º Tilt Range
- 10 Stepped Counterbalance
- Pan and Tilt Drag 5 Grades Plus 0
Email me when stock arrives
- Product: #40730
- SKU: ST-S2046-0001-NZ
The FSB 10T Fluid Head from Sachtler supports payloads up to 12 kg. Designed to accommodate digital cinema-style cameras, such as the Sony FS7, Canon C500, and Blackmagic Ursa Mini. The head offers Sachtler's Touch and Go quick release with a sliding range of 2.4"(6.0 cm). It also features a 10-step counterbalance along with horizontal and vertical 5-step drag controls. In addition, a zero setting on the pan and tilt drag controls allows for unencumbered movement of the head.
The fluid head features a 100mm bowl interface for tripod mounting and incorporates an illuminated bubble level for easy levelling in poor light conditions. A pan handle, which can be mounted on either side of the head, is also included.
Levelling Ball with Flat Base
The fluid head features a 100mm ball for quick levelling on your tripod legs. The ball features a flat base so you can also mount it on a flat surface.
Frictionless Leak-Proof Fluid Damping
Frictionless leak-proof fluid damping with five levels of drag enable precision adjustment to match the needs of your shot. A zero setting allows complete disengagement of drag for fast panning.
Camera Mounting and Balancing
Featuring a touch and go quick release plate that you can mount on your camera or baseplate. The fluid head's camera platform has 2.4" of travel for balancing your camera on the head.
|Load Capacity||4 to 12 kg|
|Counter Balance System||Spring-loaded (Stepped counterbalance mechanism)|
|Counter Balance Range||10 steps|
|Centre of Gravity||Maximum payload has been measured at 100 mm|
|Quick Release/Wedge Plate||Touch & Go camera plate S|
|Balance Plate||Not Specified by the Manufacturer|
|Tilt Drag||5 steps, plus zero|
|Tilt Range||+90° to -70°|
|Levelling Bubble/Illuminated||Yes/Yes (battery powered)|
|Battery||CR2032 3 V battery for illuminated bubble level (included)|
|Pan Bar||DV 75 single pan bar (included)
Diameter: 0.63" (16 mm) / 1" (28 mm)
Length: 16.9" (430 mm)
|Temperature Range||-40 to 60°C|
|Height||7" (178 mm)|