Schneider 4 x 4" Tru-Cut Ultraviolet (UV) Infrared (IR) 750 Blocking Filter
Email me when stock arrives
- Product: #27412
- SKU: 68-121044
The 4 x 4"Tru-Cut Ultraviolet (UV) Infrared (IR) 750 Blocking Filter from Schneider Optics has a completely colourless glass carrier coated with a number of extremely thin, partially reflecting layers with precisely computed thicknesses, similar to MC coating (multi-coating).
The Schneider Tru-Cut IR filter does not block by means of absorption, but by interference of the unwanted UV and IR radiation that is repeatedly reflected between these layers affecting the wavelengths on both sides of the visible spectrum with a steep cut-off. This filter is particularly effective when using high-density neutral density filters that help control depth of field. As the iris on the lens becomes larger, the danger from IR contamination becomes more prevalent. By using this filter, colours become more vibrant and true.
The purpose of this filter is to block all UV and IR 'light' from reaching the sensor. This is particularly useful with some high end video cameras on the market that leak IR and produce magenta blacks in low light - this filter will bring the blacks back to black. The filter is clear when you look through it at 90° but when you look at it from an oblique angle, it has a magenta or cyan cast due to the complex coatings.
- Used mainly on digital and video cameras with CCD sensors without an integrated IR protection filter, because the IR sensitivity of the CCD sensor would otherwise cause colour changes and unsharpness
- That unsharpness results from the chromatic aberration of the lenses that are only corrected for visible light
- In the visible range, the transmission curve is very high and straight
||Tru-Cut IR 750
||4 x 4" (100 x 100mm, 4mm thick)
||1 (This filter is completely clear and requires no increase in exposure)
||Blocks unwanted UV and IR radiation
||Digital, video and MPTV photography
||Schott Water White Glass
|Front Filter Thread Size
|Front Lens Cap Size