Shure ANIUSB-MATRIX USB Audio Network Interface
- For Conferencing Applications.
- Connects 4 Dante Channels.
- Flexible Signal Routing and Connectivity.
- Power over Ethernet.
- Compact Form Fact, Easy to Mount.
Email me when stock arrives
- Product: #65838
- SKU: ANIUSB-MATRIX
The Shure ANIUSB-MATRIX USB Audio Network Interface is designed for audio/video conferencing installations in small and medium-size meeting rooms. It can be used to connect 4 Microflex Advanced or Microflex Wireless microphone channels via Dante (4 in/2 out), and provide analogue connectivity to a room audio/video conferencing system or a PC-based A/V conferencing application via USB (1 in/out).
An internal matrix mixer offers flexible routing, allowing users to route any input to any output. A 4-band parametric AEQ filter is also available on the analogue and USB outputs. The ANIUSB-MATRIX is compact and easy to mount without an equipment rack.
- Connects 4 Dante audio inputs and 1 analogue input to an A/V conferencing system or a PC-based videoconferencing application
- Flexible signal routing and connectivity: analogue audio (1 block in/1 block out) to room A/V conferencing system; USB (1 in/out) to connect to laptop or room PC
- Power over Ethernet (PoE) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without equipment rack
|Inputs (Analogue)||1 x 3-pin block connector (active balanced)|
|Outputs (Analogue)||1 x 3-pin block connector (impedance balanced)|
|USB Connection||1 x USB 2.0, Type-B|
|Dante Connection||1 x RJ45
Channel Count: 4 inputs, 2 outputs
|Polarity||Non-inverting, any input to any output|
|Power Requirements||Power over Ethernet (PoE), Class 0 (PoE Plus compatible)|
|Power Consumption||6.5 W maximum|
|Application Control||HTML5 browser based|
|Operating Temperature Range||20 to 104°F (-6.7 to 40°C)|
|Storage Temperature Range||20 to 165°F (-29 to 74°C)|
|Thermal Dissipation||Maximum: 6.8 W (23.0 BTU/hr)
Typical: 6.0 W (20.8 BTU/hr)
|Frequency Response||20 Hz to 20 kHz +1, -1.5 dB|
|Dante Audio Flows||Sampling Rate: 24-bit/48 kHz|
|USB Audio||16-, 24-bit/44.1, 48 kHz|
|Latency||Does not include Dante latency
Analogue to Analogue: 0.98 ms
Analogue to Dante 0.39 ms
Dante to Analogue: 0.72 ms
Dante to Dante: 0.14 ms
|Dynamic Range||20 Hz to 20 kHz, A-weighted, typical
Analogue to Dante: 113 dB
Dante to Analogue: 117 dB
|Equivalent Input Noise||20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
Line: -86 dBV
Aux: -98 dBV
|Total Harmonic Distortion (THD)||<0.05% @ 1 kHz, 0 dBV input, 0 dB analogue gain|
|Common Mode Rejection Ratio||>70 dB, 150 Ohms balanced source @ 1 kHz|
|Input Clipping Level||Line: +27 dBV
Aux: +15 dBV
|Output Clip Level||Line: +20 dBV
Aux: 0 dBV
Mic: -26 dBV
|Digital Signal Processing (DSP)||Per Channel: Equaliser (4-band Parametric, Analogue and USB output channels only), Mute, Limiter, Gain (140 dB range)
System: Matrix mixer
|Networking||Cat 5e or higher (shielded cable recommended)|
|Dimensions (H x W x D)||1.6 x 5.5 x 5.0" (4 x 14 x 12.8 cm)|
|Weight||1.5 lb (672 g)|