Sirui A1205 Carbon Fibre Tripod with Y-11 Ball Head

Description

The A1205 Carbon Fibre Tripod with Y-11 Ball Head from Sirui is a 5-section tripod that weighs 1 kg. The 8x carbon fibre legs fold a full 180° in reverse to make it a compact 37.1 cm. With the centre column fully extended, the tripod can reach a maximum working height of 140 cm. Additionally, with a load capacity of 10 kg, this tripod is suitable for a pro DSLR with a large telephoto lens.

The hook at the bottom of the centre column enables you to hang a small sandbag or camera bag to stabilise the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 25.9 cm, and the centre column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play–the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the centre column to it.

The included Y-11 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360° panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90° angle.

Key Features:

• The 1 kg tripod has a maximum height of 140 cm, a minimum height of 25.9 cm, and a load capacity of 10 kg
• The 8x carbon fibre legs have 5-sections and the legs fold in reverse to a compact 37.1 cm
• Weight and stability can be increased on the support by adding a small sand bag or camera bag to the hook located at the bottom of the centre column
• The tripod's detachable leg converts into a monopod and the height is increase when the leg is attached to the centre column
• The Y-11 Ball Head has separate knobs for the pan and tilt, and a single cut notch for a 90° angle position of the camera