Stardom SR8-TB2 8 Bay Thunderbolt storage
Email me when stock arrives
SR8-TB2 is built-in the easy-to-use hardware RAID, and it won’t hurt system performance during its REBUILDING WORK completely! It would meet your requirement who always requests for both system performance and the high memory capacity.SR8-TB2 with RAID 5 or even RAID 6 feature would be your best cost-effective storage solution at both of data protection and the system performance. It’s really easy for you to set up your new buy SR8-TB2 in your office or even at home. Thru Marvell’s MSU Tool, you could set up its hardware RAID thru a graphic user-friendly interface. You could choose one of the following 8 different RAID modes, RAID 0, 1, 5, 6, 10, 50, 60 and JBOD, to fit your needs for the available larget storage space together with its data protection feature. SR8-TB2 can enable email notification and event log function through Marvell tool software. When a device failure, hard disk or disk array is damaged, SR8-TB2 will buzzer alarm and immediately send an email notification to the user so that the user can immediately understand the device of situation. SR8-TB2 supports Thunderbolt 2.0 (TB2) interface for an extreme high data transfer speed. And both of the two TB2 ports are equipped with an up to 20Gb/s data transfer rate which is 4 times faster than USB3.0 and even 3+ times than SATA III interface. You could definitely use it to play your 4K high-resolution films with no any lagging hassle. TB2 interface not only brings you this high data transfer rate advantage, it also lets you chain maximum up to another 5 more SR8-TB2 products (or other compatible storage products).
- 8-bay hard drive tower enclosure, with RAID 0/1/5/6/10/50/60/JBOD function.
- Users can choose 8x 2.5″ or 3.5″ SATA hard drives.
- Daisy-chain-able device
- Target users will be those people who have to protect their data from RAID 5/6 or speed up the performance from RAID 0 access more than one data hard drive at the same time from JBOD mode.
- Designed with 8 hot-swappable hard drive Trays, user can change the hard drives with easy and no need to power off.
- Activate hard drives respectively in order to let the high power consumption drives work smoothly.
|Interfaces||Thunderbolt 2 Port x 2 ( up to 20 Gbps )|
|Compatible Drive||8 x 3.5? / 2.5? SAS/SATA HDD/SSD ( up to 6 Gbps ) / Support volumes up to 10TB|
|Storage Mode||RAID 0, 1, 5, 6, 10, 50, 60 and JBOD|
|Certifications||CE & FCC|
|Operating System Support||Windows 7-32/64bit, Windows 10-32/64bit, Mac OS X 10.10 or above|
|Cooling System||8cm Low noise fan x 2|
|Electrical and Operating Requirements||Line voltage: 100-240V AC|
|Frequency: 50Hz to 60Hz, single phase|
|Maximum continuous power: 300W|
|Operating temperature: 50° to 95° F (10° to 35° C)|
|Storage temperature: -4° to 113° F (-20° to 45° C)|
|Relative humidity: 5% to 95% noncondensing|
|Size and Weight||Height: 296 mm Width: 140 mm Depth: 282 mm Weight: 4.525 kg|