Tether Tools Starter Tethering Kit with USB 2.0 Mini-B 5-Pin Cable (Black)
Email me when stock arrives
- Product: #56963
- SKU: BTK50
The Starter Tethering Kit from Tether Tools gives you all the essential gear needed to create a secure data connection between your camera and computer. This kit comes with a black USB 2.0 cable that is equipped with a typical USB Type-A connector on one end and a USB mini-B 5-pin male connector on the other side, making it compatible with digital cameras. The USB 2.0 cable is 4.6m long and transmits data at a rate of up to 480 Mb/s.
Tether Tools includes two JerkStoppers that remove the strain placed on the computer and camera's ports from the connecting cable and help ensure the cable stays connected. For preventing tangles, ten ProTab cable ties keep the power, video, and other types of cables well managed and organised. In addition, this kit provides a Tether Tools organisation case, so you can store the included cable, cable retention devices, and cable ties.
Tether Tools TetherPro USB 2.0 Type-A to 5-Pin Mini-USB cable
The black TetherPro USB 2.0 Type-A to 5-Pin Mini-USB cable is 4.6m long and has gold plated connectors that provide consistent and reliable conductivity as well as corrosion resistance. The ends of this cable feature a standard USB Type-A male connector and the other side is outfitted with a 5-pin mini-B male plug, which is compatible with most digital cameras.
To deliver data at speeds of up to 480 Mb/s, Tether Tools has equipped this cable with USB 2.0 technology. It sports a reinforced Ferrite core that filters out signal noise and reduces transmission errors. In addition, the full-lined shielding feature protects the signal against external interference.
JerkStopper Camera Support
This kit will remove all the stress and strain placed on the cable or cord to ensure it stays plugged in and prevents cable or equipment damage. This kit can be used with any standard A/C power adapter cord, flash sync cord, HDMI, USB or FireWire cable. It supports cable diameters from 3.5mm to 8.5mm.
JerkStopper Computer Support (USB Port)
This JerkStopper Computer Support will remove all the stress and strain placed on the cable or cord to ensure that it stays plugged in and prevents cable or equipment damage.
This particular computer support model uses a spare USB port as an anchor point by allowing slack in the cord in order to prevent damage or dislodging. This kit can be used with any standard A/C power adapter cord, flash sync cord, HDMI, USB or FireWire cable. It supports cable diameters from 3.5mm to 8.5mm.
Cable Organisation Case (Standard) The standard case design is ideal to store cables and additional accessories. If you are transporting or storing cables less than 6m this case is ideal.
JerkStopper ProTab Cable Ties The JerkStopper ProTab Cable Ties are a 10-pack of the small-sized ties and are designed for keeping thin- to medium-gauge cables and cords such as A/C, USB, HDMI and music cables up to about 4.6m in length organised and well maintained.
|TetherPro USB 2.0 Type-A to 5-Pin Mini-USB Cable (4.6m)|
|Interface||USB 2.0 (480 Mb/s)|
|Connector 1||USB Type-A Male|
|Connector 2||USB Mini-B Male|
|JerkStopper Camera Support|
|Supported||Fits cable diameters from 3.5mm to 8.5mm|
|JerkStopper Computer Support (USB Port)|
|Included||JerkStopper Computer Support (USB Port)|
|Supported||Fits cable diameters from 3.5 - 8.5mm|
|Cable Organisation Case (Standard)|
|Dimensions (W x H x D)||20.32 x 20.32 x 5.08cm|
|JerkStopper ProTab Cable Ties (Small, Set of 10)|
|Closure Type||Hook and loop|
|Dimensions (L x W)||135 x 16 mm|